Missouri CDL DMV Endorsement Hazmat 2

While the manual includes all of the information required to pass the hazardous materials knowledge test, you should consider reading the manual as only the first step to learning about the topic. You can learn more by reading and understanding the federal and state rules about the transportation of hazardous materials, as well as by attending hazardous materials training courses.

The shipper of hazardous materials is responsible for packaging, marking, and labeling the materials properly. It is a good idea for the driver to ensure the materials are properly labeled.

A person attending a parked placarded vehicle must be either awake inside the vehicle or they must be within 100 feet of it. If not inside the vehicle itself, the person must have a clear view of the vehicle. The person attending may not be inside the sleeper berth.

Employees who work with hazardous materials must be trained and tested at least once every three years.

If your vehicle breaks down while you are transporting explosives and you need to use warning signals, use reflective triangles or red electric lights. Never use burning signals, such as flares or fuses, when transporting explosives.

Packages that contain liquid containers must have orientation markers. Arrows displayed on the box should be pointing in the correct upright direction.

Radiation will surround each package of radioactive materials and pass through to all nearby packages. The number of packages that can be loaded together is controlled.

Shippers should place applicable diamond-shaped hazard warning labels on hazardous materials packages. If a label will not fit entirely onto a package, shippers may instead place the label on a tag that is securely attached to the package.

Unless you must run the engine to operate a pump, you should always turn off the engine before loading or unloading flammable liquids.

Hazardous materials warning placards are diamond-shaped.

The use of cargo heaters is not always permitted. When transporting materials that are categorized as Class 1 (Explosives), Class 2.1 (Flammable Gases), or Class 3 (Flammable Liquids), the use of heaters in the same space is generally prohibited.

In general, vehicles carrying hazardous materials are required to display diamond-shaped warning signs on all four sides. These warning signs are called "placards."

If a shipping paper describes both hazardous and non-hazardous materials, the hazardous materials must be distinguished in one of three ways. They must be entered first on the shipping paper, highlighted in a contrasting color, or properly marked with an "X" in a column titled "HM."

If a shipping paper includes information about both hazardous and non-hazardous materials, the hazardous items must be clearly identified on the paper. They may be entered first, highlighted in a contrasting color, or identified with an "X" placed before the shipping description.

Shippers of hazardous materials are required to warn drivers and others about the risks of the materials by putting hazard warning labels on packages, putting placards on the transporting vehicles, and providing proper shipping papers and emergency response information.

Hazardous materials warning placards are usually diamond-shaped.

Many hazardous materials classified as poisonous are also flammable.

A vehicle that lacks the proper placards for any hazardous materials on board may not be driven, except as necessary to protect life and property in an emergency.

The power unit of a placarded vehicle must be equipped with a fire extinguisher with an Underwriters Laboratories (UL) rating of 10 B:C or more.

Hazardous materials warning placards are diamond-shaped.

When carrying Division 1.1, 1.2, or 1.3 explosives, do not park within 300 feet of a bridge, tunnel, or building; a place where people gather; or an open fire.

When applying for an original or renewed HazMat endorsement, you must undergo a federal security threat assessment done by the Transportation Security Administration (TSA).

Among other information, shipping papers must include a description of the specific hazardous materials being transported.

When carrying Division 1.1, 1.2, or 1.3 explosives, you should not park within 300 feet of a bridge, tunnel, or building, unless you are parking for a short period of time while performing an operational necessity, like refueling.

Unless your engine runs a pump for product transfer, turn it off when loading or unloading a compressed gas tank. If you do use your engine to run a pump, you should turn the engine off after the product transfer but before unhooking the hoses.

If a driver stops and exits their vehicle, the hazardous materials shipping papers must be left on the driver's seat.

If you discover a cargo leak while transporting hazardous materials, use the shipping papers, label, or package location to identify which materials are involved. Do not try to touch or smell the leaking materials to determine what they are because doing so could result in injury or death.

Unless excepted, hazardous materials shipping papers must list an emergency response telephone number.

Shippers of certain kinds of hazardous materials are required to display diamond-shaped warning signs, known as placards, on any transporting vehicles. Shippers are required to provide applicable placards, labels, shipping papers, and emergency response information.

When required, hazardous materials placards must be placed on all four sides of a vehicle transporting hazardous materials.