Mississippi MOTORCYCLE DMV Practice Test 9

Hand signals are an important part of communication when riding in groups. If a lead rider extends their left arm straight down with their palm facing back, the group of riders should come to a stop.

When being passed, you should not ride on the side of your lane that is farthest from the passing vehicle. Doing so may tempt the driver to return to your lane before there is actually room for them to do so safely.

If you must swerve to avoid a hazard, apply a small amount of pressure to the appropriate handle grip. To swerve to the left, press the left handle grip, then press the right to recover. To swerve to the right, press the right handle grip, then the left.

To ride safely on a slippery surface, you should use both brakes when slowing or stopping, reduce your speed, and avoid making sudden moves. Be alert to oily areas, dirt, gravel, shaded areas, and bridges, as these surfaces are more likely to be slippery than others.

Passing is prohibited in no passing zones. It is also prohibited to pass by riding off of the main-traveled portion of a roadway.

Goggles and face shields will help protect your eyes from wind. Most windshields, as well as eyeglasses or sunglasses, will not.

Braking in a turn is not as easy as braking on a straightaway. It is possible to use both brakes to brake in a turn, but the operator must know the proper technique and exercise great care.

When preparing to pass on the left, you should ride in the left portion of your lane. This lane position will increase your line of sight and make your more visible to oncoming traffic.

There are several major factors that can affect a person's blood alcohol concentration (BAC). A BAC is determined in part by the amount of alcohol someone has consumed, how fast they consumed the alcohol, and their body weight.

When riding, it is safest for a motorcyclist to wear a helmet, eye protection, a jacket, long pants, sturdy boots, and gloves.

A number of surfaces can provide poor traction for tires. Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; painted lane markings; and metal covers and plates in the road can be more hazardous for a motorcyclist than dry pavement.

To ensure that you are getting the maximum possible protection from your helmet, choose one that is designed to meet U.S. Department of Transportation (DOT) and state standards. It should fit snugly all the way around and have no obvious defects, such as cracks, loose padding, or frayed straps.

Reflective material on a vest or on the sides of your helmet can make you more visible to other drivers and should be used both day and night.

The only method that effectively reduces your BAC is not drinking alcohol for a period of time. Coffee, exercise, fresh air, and cold showers cannot reduce your BAC or change the effects of alcohol. They can help you remain awake, but they cannot change your BAC or make you sober.

Because you need adequate traction to swerve safely, you should not brake and swerve at the same time. Instead, if you approach a hazard that requires you to brake and swerve, you should perform one action and then the other.

In general, there is no single best lane position. No portion of the lane need be avoided at all times. Position yourself in the portion of the lane where you are most likely to be seen and you can maintain a cushion of space around you.

An expanded cushion of space is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up to a larger following distance.

A properly chosen lane position should protect your lane from other drivers while communicating your intentions to them.

When traveling faster than a walking pace, your motorcycle will need to lean to turn. Pressing the grip in the direction you want to turn will cause you to lean in the appropriate direction

The front brake lever is generally located on the right handgrip. Make sure that you are aware of the locations of all your motorcycle's controls before beginning to ride.

The clutch lever is generally located near the left handgrip. Be sure to know where all of your motorcycle's controls are located before riding.

Road and traffic conditions can change at any time. Always be prepared to change your lane position as appropriate no matter where you are on a roadway. The best path through a curve does not necessarily follow the curve of the road.

Of the crashes involving both a motorcycle and a car, more than half are caused by the driver failing to properly yield right-of-way to the rider.

Oily drippings from cars collect in a strip in the center of a traffic lane. Unless the road is wet, this area will generally still provide enough traction for motorcyclists to ride safely. Because the strip is usually no more than two feet wide, it is often possible to ride to one side of the strip and still be in the center portion of the lane.

You should use both brakes every time you slow or stop.