Over 95% pass rate when practice at DMV Practice Test

Mississippi CAR DMV Practice Test 20

Take 24 practice tests for CAR is the best way to prepare for your Mississippi DMV exam is by taking our free practice tests. The following question are from real Mississippi DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
24
Number of Question
30
Passing score
24
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. Water on the road can cause a vehicle to hydroplane. Your car may hydroplane at speeds as low as:
45 miles per hour.
35 miles per hour.
40 miles per hour.

Hydroplaning occurs when there is standing water on a roadway. At speeds up to 35 mph, most tires will channel water away from the tire. As your speed increases past 35 mph, tires cannot channel the water as well and your tires may start to lose contact with the road and ride over the water like a set of water skis.

2. When you are behind a motorcycle, you should:
Be ready to use your horn.
Drive more slowly.
Allow a larger following distance.

When following a motorcyclist, allow for at least a three- to four-second following distance. Motorcycles can stop quickly and following them too closely endangers your life and that of the motorcyclist. If the motorcyclist should fall, you need extra distance to avoid the rider. The chances of a fall are greatest on wet and icy roads, gravel roads, and metal surfaces such as bridges, gratings, and streetcar or railroad tracks.

3. If you want to pass a pedestrian who is walking along the roadway and an oncoming vehicle is approaching, you should:
Slow down and let the oncoming vehicle pass before you pass the pedestrian.
Keep driving at a steady speed. The oncoming vehicle must stop for you.
Honk your horn to get the pedestrian to move over.

If possible, try to only deal with one roadway hazard at a time. If you want to pass a pedestrian but an oncoming vehicle is approaching, slow down and let the vehicle pass. You may then pass the pedestrian if it is safe to do so.

4. This road sign means:
/data/image/dmv_image/car/illinois-y_intersection.png
The roadway ends ahead.
Drivers must bear either right or left.
A four-way intersection is ahead.

Warning signs are usually yellow with black markings. This sign warns drivers that they are arriving upon a fork in the road and they must bear either right or left.

5. This sign means:
/data/image/dmv_image/car/california-two_way_traffic.png
Four-lane traffic ahead.
Divided highway ahead.
Two-way traffic ahead.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns that you are leaving a separated one-way highway and will soon be driving on a two-way highway.

6. What does this road sign mean?
/data/image/dmv_image/car/georgia-hill.png
Falling rocks
Trucks use second gear
Steep hill

Warning signs are usually yellow with black markings. This sign indicates that you are approaching a steep hill. Slow down and be ready to shift to a lower gear to control your speed and protect your brakes from damage.

7. If you want to enter the freeway but you don't see a gap in traffic, you should:
Maintain your speed and force the other drivers to create a gap.
Slow down on the ramp to wait for a gap.
Stop at the end of the ramp to wait for a gap.

If you want to enter the freeway but do not see a space for your vehicle in traffic, slow down on the ramp to wait for a gap. Do not drive to the end of the ramp and wait for a gap or you will not have enough room to accelerate to the speed of traffic before entering the roadway.

8. You drive defensively when you:
Put one car length between you and the car ahead.
Look only at the car in front of you while driving.
Keep your eyes moving to look for possible hazards.

You are driving defensively when you are looking down the road for potential hazards. Constantly staring at the road directly in front of your vehicle is dangerous. As you scan ahead, be alert to vehicles around you.

9. If your wheels drop off the roadway or pavement edge, you should:
Wait until it is safe to do so, then gradually re-enter the roadway.
Turn back onto the roadway immediately.
Stop.

If your wheels drop off the roadway or pavement edge, do not attempt to turn back onto the roadway immediately. Instead, reduce your speed, check traffic, and gradually turn back onto the roadway when it is safe to do so.

10. Broken yellow lines are used on streets and highways to:
Indicate no passing zones.
Separate lanes of traffic moving in the same direction.
Separate lanes of traffic moving in opposite directions.

Yellow lines separate traffic moving in opposite directions. Dashed lines on the pavement indicate that passing is permitted when safe.

11. To see vehicles in your blind spots, you should check:
The inside rearview mirror.
The outside rearview mirror.
Over your shoulders.

By definition, blind spots are areas that cannot be seen using your mirrors. To check your blind spots, you should look over your shoulders.

12. You should signal to turn ____ before beginning a turn.
100 feet
50 feet
10 feet

When you wish to change lanes or make a turn, signal to inform other motorists of your intentions. Signals are to be activated at least 100 feet before you begin a turn. When using a mechanical turn signal, continue signaling until you have completed the turn or lane change.

13. Roads are slippery after it first starts to rain. When the road is slippery, you should:
Avoid making turns and stops while driving at high speeds.
Test your tires' traction while going uphill.
Decrease the distance you look ahead of your vehicle.

A wet, slippery road does not allow your tires the traction they need, so it is necessary to drive more slowly on a wet road than you would on a dry road. To reduce the risk of skidding, you should avoid fast turns or stops.

14. Which of these statements is true about drugs and driving?
Any prescription drug is safe to use if you don't feel drowsy.
Even over-the-counter drugs can impair your driving.
Only illegal drugs can impair your driving.

Legal prescription and over-the-counter drugs can impair your ability to drive, including drugs taken for colds, hay fever, allergies, or to calm nerves or muscles. It is illegal to drive while under the influence of any drug that impairs your ability to drive safely; this law does not differentiate between illegal, prescription, or over-the-counter drugs.

15. This sign means:
/data/image/dmv_image/car/alabama-merging_traffic_from_right.png
One-way traffic.
Intersection ahead.
Merging traffic from the right.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign tells drivers to prepare to allow traffic to safely merge from the right.

16. When driving in work zones, you should:
Increase your speed to get through the zone as quickly as possible.
Reduce your speed and be prepared to stop suddenly.
Maintain your normal speed the whole way through the zone.

When entering and driving through a work zone, slow down and be prepared to stop. Obey posted speed limits and be alert to conditions around you. Workers could be present.

17. When you drive through a construction zone, you should:
Stop to watch the workers.
Decrease your following distance.
Pass the construction zone carefully and not “rubberneck."

To avoid contributing to chronic traffic congestion, you should not "rubberneck." That is, you should not slow down to look at out-of-the-ordinary things.

18. Where should drivers use their high beam headlights?
Within 500 feet of another vehicle
In busy traffic
On open country roads

Use high beam headlights only when driving in the open country where other cars are not nearby. When driving at night, your driving speed should be slower than it would be if you were driving during the day.

19. You have stopped for a train at a railroad crossing. After the train passes, you should:
Wait for signal lights to stop flashing.
Look for a second train.
Both of the above.

Even after a train passes, watch out for a second train approaching on any track. Do not proceed until all gates have been lifted and all warning signals have stopped flashing.

20. Which of the following statements about blind spots is true?
They are eliminated if you have one outside mirror on each side of the vehicle.
Large trucks have bigger blind spots than most passenger vehicles.
Blind spots can be checked by looking in your rearview mirrors.

Blind spots are areas that a driver cannot see if they look in their mirrors. Large trucks have large blind spots that drivers of other vehicles should avoid.

21. From top to bottom, the following is the proper order for traffic lights:
/data/image/dmv_image/car/pennsylvania-traffic_signal_ahead_blank.png
Red, yellow, green.
Red, green, yellow.
Green, red, yellow.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns drivers about the presence of traffic signals at an intersection ahead.

22. You should allow an extra cushion of space:
When following a station wagon.
When following a driver who cannot see the rear of their vehicle.
When following a small passenger car.

Drivers of trucks, buses, vans, or any vehicles pulling campers or trailers may not be able to see you if you are driving directly behind them. Increase your following distance when driving behind one of these vehicles. Additionally, large vehicles can block your view of the road, so increase your following distance to look around the sides of the vehicle and see the road ahead.

23. You are approaching an intersection where a traffic signal is displaying a steady yellow light. If you have not already entered the intersection, you should:
Speed up to beat the red light.
Reduce you speed and proceed carefully through the intersection.
Come to a safe stop.

At an intersection controlled by a steady yellow light, you should bring your vehicle to a safe stop. If you are already within the intersection when the light changes from green to yellow, continue through the intersection at a safe speed.

24. To turn left from a multilane one-way street onto a one-way street, you should start your turn from:
Any lane (as long as it is safe).
The lane closest to the left curb.
The lane in the center of the road.

When turning left from a one-way street onto another one-way street, you should begin the turn from the far left lane.

25. When driving in fog, drivers should use:
Their low beam headlights.
Their high beam headlights.
Their parking lights.

When driving in fog, you should always use your low beam headlights. Using high beams will reduce visibility because the high beam lights will reflect back into your eyes.

26. This sign means:
/data/image/dmv_image/car/connecticut-no_u_turn.png
No turns.
No outlet.
No U-turns.

This sign indicates that U-turns are prohibited. You may see a sign like this at an intersection that commonly has oncoming traffic.

27. If a truck or bus is making a right turn where you also need to make a right turn, you should:
Quickly turn before the truck or bus is able to.
Wait until the truck or bus turns before you turn.
Squeeze between the truck or bus and the curb.

If you try to insert your vehicle between a turning truck or bus and a curb, you may suffer a serious crash. To avoid a collision, do not turn until the truck or bus has completed its turn.

28. When passing another vehicle:
Pass the vehicle as slowly as possible.
Drive at the same speed as the vehicle you are passing.
Pass the vehicle as safely and as quickly as possible.

When passing another vehicle that is traveling in the same direction as you, pass quickly to resume visibility. Return to your previous lane only when you can see both of the vehicle's headlights in your rearview mirror.

29. This sign means:
/data/image/dmv_image/car/iowa-yield.png
Cars on the right move first.
You have the right-of-way.
Let cross traffic pass before proceeding.

When approaching this sign, you must yield the right-of-way. Slow down and let vehicles and pedestrians crossing your path pass before you proceed. If necessary, stop before going ahead.

30. Double solid yellow lane markings mean that:
Neither lane may pass.
Both lanes may pass.
The lane to the right may pass.

Yellow lane markings indicate a separation of lanes where traffic is traveling in opposite directions. When you see double solid yellow lane markings, passing is prohibited from both directions.

Your Progress
  • 0Incorrect (6 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30