Over 95% pass rate when practice at DMV Practice Test

Michigan MOTORCYCLE DMV Practice Test 8

Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Michigan DMV exam is by taking our free practice tests. The following question are from real Michigan DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
16
Number of Question
20
Passing score
16
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. The front brake:
Should only be used when you need to stop quickly.
Should be used only under slippery conditions.
Is not as effective as the rear brake.
Is safe to use, if used properly.

Always use both brakes any time you slow or stop. It is safe to use the front brake, which is more powerful than the rear brake, as long as you use it properly.

2. When riding in a group, inexperienced riders should position themselves:
Just behind the leader.
In front of the group.
At the tail end of the group.
Beside the leader.

In a group of motorcyclists, riders with less experience should be positioned toward the front of the group, just behind the leader. This will allow more experienced riders to keep an eye on them without forcing the inexperienced rider to lead the group.

3. To lessen your chances of an accident, you should:
Only ride in the afternoon.
Follow the vehicle in front of you as closely as possible.
Not look ahead and focus only on your controls.
Communicate your intentions to other drivers.

To reduce the risk of a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle.

4. If carrying a load in a sidecar, the motorcycle's stopping distance:
May be increased.
May be decreased.
Is not a concern.
Will be similar to the stopping distance of a two-wheeled motorcycle.

Because adding a load to a motorcycle increases its weight, the vehicle's inertia may increase, causing its stopping distance to increase. Begin slowing and stopping earlier when riding a motorcycle with a load or passenger in its sidecar.

5. To lean the motorcycle for a turn, you should:
Press the handgrip in the direction of the turn.
Press the handgrip in the direction opposite of the turn.
Apply the front brake.
Apply the rear brake.

A motorcycle needs to lean in order to turn. To make this happen, press on the handgrip in the direction you want to turn.

6. If your motorcycle begins to weave while you are riding over rain grooves or bridge gratings, you should:
Relax, maintain a steady speed, and ride straight across the surface.
Tighten your hold on the handle grips and increase your speed to get past the hazard.
Travel in a zigzag motion.
Ride on the shoulder instead of on the grooves.

The weaving motion that occurs when a motorcycle rides over rain grooves or bridge gratings is generally not dangerous. If you experience weaving when riding over one of these surfaces, simply relax and proceed straight across the grooves or gratings at a steady speed. Trying to compensate for the weaving motion by zigzagging is more dangerous than riding straight.

7. To get the best protection, be sure that your helmet:
Meets Department of Transportation guidelines.
Looks sturdy.
Is inexpensive.
Is in your favorite color.

Choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and be free of obvious defects.

8. If you accidentally lock your rear wheel while braking on a good traction surface, you should:
Keep it locked until you come to a complete stop.
Release the rear brake and only use the front brake.
Release the rear brake, then quickly re-apply it.
Release the rear brake and down shift.

If you accidentally lock the rear brake on a good traction surface, keep it locked until you have completely stopped. Even with a locked rear wheel, you should still be able to control your motorcycle if it is upright and traveling in a straight line.

9. To be effective, a face shield should not:
Be free of scratches.
Allow clear views to both sides.
Be airtight.
Fasten securely.

An effective face shield should be free of scratches, be resistant to penetration, allow clear views to both sides, fasten securely, permit air to pass through, and provide enough space for eyeglasses or sunglasses to be worn underneath. It is important for a face shield to permit the passage of air because an airtight face shield can create fogging and make it difficult for a rider to see.

10. To adjust for added weight when riding with a passenger, you should:
Operate at a slower speed than usual.
Maintain a shorter following distance that you would if riding without a passenger.
Operate at a faster speed than usual.
Brake a little later than you would if riding without a passenger.

The extra weight of a passenger means that your motorcycle will need more time than usual to speed up, slow down, and turn. To accommodate the added weight, you should reduce your speed; start slowing earlier than normal; increase your following distance; and seek out larger gaps when crossing, entering, or merging with traffic.

11. The center portion of a lane usually contains an oily strip. This part of the lane is:
Never safe for motorcyclists.
Usually safe, unless the road is wet.
Usually safe, unless it is sunny outside.
Always safe, no matter the weather conditions.

Oily drippings from cars collect in a strip in the center of a traffic lane. Unless the road is wet, this area will generally still provide enough traction for motorcyclists to ride safely. Because the strip is usually no more than two feet wide, it is often possible to ride to one side of the strip and still be in the center portion of the lane.

12. Which of the following is not a factor in determining blood alcohol content (BAC)?
The amount of alcohol consumed
How fast the alcohol is consumed
The drinker's body weight
How often the drinker consumes alcohol

The three major factors that affect a person's blood alcohol content (BAC) are the amount of alcohol consumed, how fast the alcohol was consumed, and the drinker's body weight. It is illegal and dangerous to operate a motor vehicle while under the influence of alcohol.

13. More than half of all motorcycle crashes:
Happen at night.
Are caused by bald tires.
Occur at speeds above 55 mph.
Involve inexperienced riders.

More than half of all motorcycle crashes involve riders who have been using their motorcycle for less than six months. Most crashes take place in broad daylight when the riders are traveling at low speeds.

14. To stop quickly, you should:
Rely only on the front brake.
Rely only on the rear brake.
Use the front brake and then the rear brake.
Use both brakes at the same time.

If you need to stop quickly, you should apply both brakes at the same time.

15. As the motorcycle’s weight moves forward while braking, you:
Can apply the front brake harder.
Should lessen the amount of pressure on the front brake.
Can apply the rear brake harder.
Lose traction.

As your weight shifts forward while you are braking, the amount of traction available to the front wheel increases. This means that you can begin to apply the front brake harder.

16. To get the best possible protection, wear a helmet that:
Fits snugly.
Is well-worn and broken in.
Is pretty loose.
Does not have a chinstrap.

Choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and be free of obvious defects.

17. When crossing angled railroad tracks, it is usually safest to approach the tracks:
By proceeding straight within your lane.
At a 45-degree angle.
At a 90-degree angle.
At a fast speed.

In general, it is safest to simply proceed straight in your lane when crossing angled railroad tracks. Turning to approach tracks at a right angle can be dangerous because it may send you traveling into another lane.

18. Why should a load be placed low on a motorcycle?
If a load is too high, it raises the center of gravity.
If a load is too high, it may interfere with the turn signals.
It may be difficult to see over a load that is placed too high.
Others can't see your load if it is low.

Placing a load too high on a motorcycle will raise the motorcycle's center of gravity and risk upsetting its balance.

19. When it starts to rain, it is usually best to:
Increase your speed.
Exit the road.
Ride in the tire tracks left by cars.
Ride in the center of the lane.

The center of a lane can be especially hazardous when wet. When it begins to rain, avoid the center of the road by riding in the tire tracks left by cars. The left tire track is often the best option.

20. To stop quickly, it is best to:
Throttle down and use the front brake.
Use the rear brake only.
Use the front brake only.
Use both brakes at the same time.

To stop quickly, apply both brakes at the same time.

Your Progress
  • 0Incorrect (4 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20