Over 95% pass rate when practice at DMV Practice Test

Massachusetts CAR DMV Practice Test 4

Take 24 practice tests for CAR is the best way to prepare for your Massachusetts DMV exam is by taking our free practice tests. The following question are from real Massachusetts DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
24
Number of Question
25
Passing score
20
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. If you stop at a railroad crossing with more than one track:
Wait to proceed until you have a clear view of all tracks.
Stop on the first railroad track and watch for another train.
Go through as soon as the train passes.
Go through when one of the tracks is free.

If you are stopped at a railroad crossing with more than one track, do not start moving as soon as a train passes. Wait until you have a clear view down all tracks before you start across. Even where there is only one track, do not start across immediately after a train passes; check again for another train that may be approaching.

2. When approaching a working snowplow:
React the same as you would to any other motor vehicle.
Assume they will allow you to have the right-of-way.
Yield the right-of-way and exercise caution.
Come to a complete stop until they are out of your line of sight.

Yield the right-of-way to snowplows engaged in work on the roads. Use extra caution in approaching, overtaking, or passing maintenance vehicles and snowplows. Because of their traveling speed and size, snowplows tend to create large clouds of blowing snow that conceal the plow, making it invisible.

3. On the freeway, you see a "Merging traffic“ sign. You should:
/data/image/dmv_image/car/washington-merging_traffic.png
Honk at incoming traffic.
Always remain at your present speed.
Speed up to avoid congesting traffic.
Move to another lane, if safe, to let traffic enter.

When on a roadway with two or more lanes, you should make room for entering vehicles. If there is no one driving next to you, move over one lane.

4. You must not drive your vehicle at a speed greater than:
The maximum speed limit.
A speed that is faster than is reasonable and prudent.
A speed that is safe for existing conditions.
All of the above.

You must not drive at a speed that is faster than is reasonable and prudent. You must drive at a speed that is appropriate for the area where you are driving, the type and condition of surrounding traffic, the presence of pedestrians, the weather, the quality of the road, and light conditions. You must drive within legal speed limits.

5. A diamond-shaped sign is a:
Road hazard sign.
Interstate route sign.
School crossing sign.
Speed limit sign.

Warning signs are normally diamond-shaped and yellow, although orange warning signs are used in work areas. Such signs warn that you are approaching a hazardous location or an area where special rules apply.

6. An "End school zone" sign indicates:
That the speed limit is 20 mph.
The beginning of a reduced speed zone.
The increased possibility of encountering pedestrians.
The end of a reduced speed zone.

Do not exceed the school zone speed limit during indicated times. The end of a reduced speed school zone will be indicated by an "End school zone" regulatory sign.

7. This road sign means:
/data/image/dmv_image/car/alabama-divided_highway_ahead.png
Keep right.
Keep left.
Pass with caution.
No passing.

This sign indicates that a divided highway begins ahead. The road splits into two one-way roadways separated by a median or divider. You must keep to the right.

8. This sign means:
/data/image/dmv_image/car/indiana-one_way.png
One-way traffic.
Two-way left turn.
Two-way traffic.
Minimum speed limit.

Regulation signs regulate traffic speed and movement, displaying rules which drivers must obey. This sign tells drivers the direction in which they must drive when turning onto a one-way street.

9. Car drivers should know that large trucks:
Have large blind spots.
Can stop more quickly than passenger vehicles.
Do not need more room to maneuver than passenger vehicles.
All of the above.

A large truck has large blind spots to the front, sides, and rear of the vehicle. Avoid lingering in these areas. Because of their larger size and weight, trucks require more room to maneuver and stop than passenger vehicles.

10. If an approaching train is near enough or going fast enough to be a danger, you must:
Slow down and proceed with caution.
Not cross the tracks until the train has completely passed.
Cross the tracks at your own risk.
Find an alternative route across tracks.

You should look and listen for trains before crossing any railroad tracks. If an approaching train is near enough or going fast enough to be a danger, you cannot go across the tracks. This is true even if they have no signals or the signals are not working.

11. This sign means:
/data/image/dmv_image/car/indiana-yield.png
Yield.
Crossroad ahead.
Keep right.
Yield ahead.

Traffic signs with three sides of equal length warn drivers to slow down when approaching an intersection and to be prepared to come to a complete stop to yield to other drivers or pedestrians. Drivers may proceed when it is safe to do so.

12. This sign means:
/data/image/dmv_image/car/indiana-two_way_traffic.png
Two-way traffic.
Lane shifting.
Low clearance.
Added lane.

Warning signs prepare drivers for upcoming road conditions and hazards and are usually yellow with black markings. This sign tells drivers that they may encounter traffic coming from the opposite direction.

13. A steady yellow traffic signal means that a ____ light will soon appear.
Flashing yellow
Steady green
Steady red
Flashing red

A steady yellow light on a traffic signal indicates that a steady red light will soon appear.

14. The driver's left arm and hand are extended upward. This hand signal means that the driver plans to:
/data/image/dmv_image/car/new-york-hand_signal_up.png
Turn left.
Turn right.
Come to a stop.
Go straight ahead.

If a driver's left arm and hand are extended upward, they are indicating that they intend to turn right. Adjust your driving accordingly if following a driver who is using this hand signal.

15. You may drive around or under a gate that is being lowered or raised at a railroad crossing:
As long as an approaching train is not too close.
If your vehicle can do so without damaging the gate.
If you first look carefully in both directions.
Under no circumstances.

Flashing red lights, lowered crossing gates, and/or bells at a railroad crossing mean that you must come to a complete stop. You must not go across the tracks until the lights and bells have stopped and the crossing gates are completely up. Do not drive around or under a gate that is moving up or down.

16. While driving, you come upon a sign displaying the words “Reduced speed, 35 mph." This means:
That the new 35 mph speed limit begins at this sign.
That the new 35 mph speed limit begins at the next speed limit sign.
That you have plenty of time to slow down before the reduced speed zone.
That you should reduce your speed to 35 mph, but only under poor weather conditions.

"Reduced speed" signs inform drivers that they must reduce their speeds. If a new speed limit is posted on one of these signs, the new speed limit begins at the sign.

17. If you stop along the road at night:
Turn off all your lights.
Use your parking lights only.
Use your headlights only.
Turn on your emergency flashers and leave your low beams turned on.

If you stop along the road at night, turn on your emergency flashers and leave your low beam headlights turned on. Be sure that other road users will be able to clearly see your vehicle.

18. You may drive across a dashed white line:
At any time.
Only during daylight hours.
When it is safe to change lanes.
Only when passing a motorcycle.

Traffic lanes moving in the same direction are separated by broken white lines. You may cross over dashed lines to pass, if it is safe to do so.

19. Seat belts are most effective when they are worn by:
The person driving the car.
Passengers when they are on a long drive.
All occupants of a car being driven on an expressway.
All occupants of a car every time the car is driven.

When you drive, make sure each person in your vehicle wears a seat belt. In the event of a crash, a person without a seat belt becomes a flying object and a danger to each person in the vehicle.

20. If two drivers arrive at the same time to an open intersection:
The driver on the right has the right-of-way.
The driver on the left has the right-of-way.
One driver may continue driving without stopping.
One driver should honk to indicate that they are giving up the right-of-way.

If you arrive to an open intersection at the same time as a vehicle to your right, you should yield the right-of-way to that vehicle. You may then proceed when it is safe to do so.

21. You want to back out of your driveway. You see children playing nearby. Before you start to move your car, you should:
Rev your engine to warn the children that you are moving.
Sound your horn so the children will hear you.
Walk to the back of the car to be sure the way is clear.
Tell the children to stay away from the driveway.

When you back up a vehicle, look through your back window for pedestrians and other obstacles. Do not rely only on your mirrors, especially when children are near. Before you back into or out of a driveway, get out of the vehicle and check behind your vehicle.

22. When getting ready to change lanes, you should:
Check your side view mirror.
Check your rearview mirror.
Quickly turn your head to check for other vehicles.
All of the above.

Before changing lanes, check your side and rearview mirrors for traffic approaching you from behind. Just before you begin moving into the other lane, quickly glance over your shoulder and check for any vehicles that may be in your blind spot.

23. You are approaching a railroad crossing that has no visible gates or flashing lights, but has a standard crossbuck. You should:
Approach all tracks with extreme caution and cross only when you know that there is no train coming.
Turn your radio down to hear if there may be an approaching train.
Only continue once cleared to do so by a flagger, if applicable.
All of the above.

You must approach all railroad crossings with extreme caution and cross only when you know that no train is coming from either direction. If there is a flagger at a crossing, you must obey all of their instructions.

24. This road sign means:
/data/image/dmv_image/car/arkansas-merging_traffic.png
Cars in right lane must slow down.
No left turn.
Merge.
Pass only in the right lane.

This sign indicates a merge ahead. It warns that two lanes of traffic moving in the same direction are about to become one.

25. If you drink alcohol socially, what helps ensure safe driving?
Drink coffee before driving.
Ride home with a friend who has not been drinking.
Take a cold shower before driving.
Stop drinking one half hour before driving.

One strategy to avoid driving while impaired or intoxicated is to arrange for a ride home with a friend who does not drink. Drinking coffee or taking a cold shower cannot reduce your blood alcohol content or reduce the effects of alcohol. On average, it takes about an hour for the body to eliminate the alcohol from a single drink.

Your Progress
  • 0Incorrect (5 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25