Over 95% pass rate when practice at DMV Practice Test

Maryland CAR DMV Practice Test 24

Take 24 practice tests for CAR is the best way to prepare for your Maryland DMV exam is by taking our free practice tests. The following question are from real Maryland DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
24
Number of Question
25
Passing score
20
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. When driving in fog, you should:
Slow down and use your low beam headlights.
Slow down and use your high beam headlights.
Turn your lights on and off to warn other drivers.

When driving in fog, you should slow down and use your low beam headlights. If the fog is so bad that you cannot see, pull off the road and wait for the fog to clear.

2. After passing a vehicle, it is safe to return to your driving lane when:
The driver you passed signals for you to return to your lane.
You signal your intention for three seconds.
You see the headlights of the passed vehicle in your rearview mirror.

Before you return to your driving lane, be sure you are not dangerously close to the vehicle you have just passed. One way to do this is to look for the vehicle in your inside rearview mirror. When you can see both headlights in your rearview mirror, you may have enough room to return to your driving lane.

3. Interstate driving requires drivers to:
Have the ability to safely drive at increased speeds.
Be constantly alert.
Both of the above.

Safe use of the interstate demands drivers be constantly alert and capable of driving at high speeds.

4. You are on the freeway and traffic is merging into your lane. You should:
Make room for the merging traffic, if possible.
Assert your right-of-way by driving faster.
Always maintain your position.

When traffic permits, you should make room to allow vehicles to merge into your lane.

5. This sign means:
/data/image/dmv_image/car/illinois-downgrade.png
Upcoming downgrade or hill.
Road construction area.
Upcoming narrowing of roadway.

This sign warns of a dangerous downgrade or hill ahead. The hill may be very long or steep, or it may have sharp curves.

6. This road sign means:
/data/image/dmv_image/car/georgia-slippery_when_wet.png
When pavement is wet, reduce your speed.
The road ahead winds in a series of turns or curves.
Traffic increases ahead.

Warning signs are usually yellow with black markings. This sign warns drivers that the roadway will be slippery when wet and they should reduce their speed accordingly.

7. This sign means:
/data/image/dmv_image/car/tennessee-slippery_when_wet.png
Slow down; curving road ahead.
Slow down and do not use your brakes.
Slow down; slippery when wet.

This sign warns that the road ahead becomes slippery when wet.

8. When parking your vehicle on any hill:
One of your rear wheels should touch the curb.
Use your parking brake and leave the vehicle in "park."
Your front wheels should be parallel to the road, if there is no curb.

When parking on a hill, you should always leave your vehicle in gear or in the "park" position. If there is no curb, you should turn your front wheels so that the vehicle will roll away from the center of the road if the brakes fail. If there is a curb, the front wheels should be turned toward it (if headed downhill) or away from and gently touching it (if headed uphill).

9. If you have a sudden tire blowout:
Use the brakes lightly.
Pump the brakes.
Apply the brakes firmly.

If a tire suddenly goes flat while you are driving, hold the steering wheel tightly and keep the vehicle moving straight. Slow down gradually by taking your foot off the gas pedal and using the brakes lightly.

10. Extra space in front of a large truck is needed for:
Other drivers to merge onto the freeway.
The truck driver to stop the vehicle.
Other drivers when they want to slow down.

Because they are larger, trucks take longer to stop than cars traveling at the same speed. Other drivers should not pull in front of a truck and then slow down or stop.

11. This road sign means:
/data/image/dmv_image/car/georgia-hill.png
Intersection ahead.
Steep grade ahead.
Winding road.

Warning signs are usually yellow with black markings. This sign indicates that there is a steep hill ahead. Slow down and be ready to shift to a lower gear to control your speed and protect your brakes from damage.

12. Should you always drive more slowly than other traffic?
No, you can block traffic when you drive too slowly.
Yes, it is a good defensive driving technique.
Yes, it is always safer than driving faster than other traffic.

You must drive more slowly than usual when there is heavy traffic or bad weather. However, if you block the normal and reasonable movement of traffic by driving too slowly, you may be cited.

13. This sign means:
/data/image/dmv_image/car/nebraska-lane_ends.png
Merge right.
Divided highway begins.
Lane ends.

This sign indicates that the right lane ends ahead. A merging maneuver will be required for drivers in that lane.

14. "No zones" are areas around trucks where cars:
Disappear into blind spots or are so close that they restrict the truck driver's ability to stop and maneuver safely.
Have sufficient space to travel behind the truck.
Have several car lengths between their vehicle and the truck.

"No zones" are areas around trucks or buses in which cars disappear into the larger vehicle's blind spots. "No zones" can also be defined as areas in which cars are so close to the larger vehicle that they restrict the truck or bus driver’s ability to stop and maneuver safely. A car being in a "No zone" greatly increases the potential for a crash.

15. A sign with this shape means:
/data/image/dmv_image/car/pennsylvania-no_passing_zone2.png
No passing zone.
Right turn permitted on red.
Yield right-of-way.

A pennant-shaped sign marks the beginning of a no passing zone.

16. You should always travel:
At the speed of vehicles surrounding you.
At the speed limit.
At a speed appropriate for road and weather conditions.

The speed at which you should drive your vehicle depends on road conditions, the weather, and the legal speed limit. You may never drive above the legal speed limit. Decrease your speed when anything makes conditions less than ideal.

17. This sign means:
/data/image/dmv_image/car/alabama-merging_traffic_from_right.png
One-way traffic.
Intersection ahead.
Merging traffic from the right.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign tells drivers to prepare to allow traffic to safely merge from the right.

18. The first thing that alcohol effects is:
Vision.
Judgment.
Balance.

Alcohol reduces all of the important abilities you need to drive safely. Alcohol goes from your stomach to your blood, then from your blood to all other parts of your body. Alcohol affects the areas of your brain that control judgment and skill.

19. To pass on a two-lane road, you should:
Sound your horn as you pass.
Flash your headlights as you pass.
Judge the distance to any oncoming vehicles.

It can be hard to judge the speed of oncoming vehicles. They do not always seem to be coming as fast as they really are. Always be sure you can safely change lanes when passing on a two-lane street. If you are not sure of an oncoming vehicle's speed, wait to pass until the oncoming vehicle has passed and you are sure there is enough space for you to change lanes safely.

20. At a railroad crossing, you must:
Watch for vehicles that must stop at all railroad crossings (school buses, trucks carrying hazardous materials, etc.).
Watch for multiple trains.
Both of the above.

You must approach all railroad crossings with extreme caution and cross only when you know that no train is coming from either direction. Be aware of vehicles that must stop at all railroad crossings, such as school buses and trucks carrying hazardous materials.

21. Give the right-of-way to any pedestrian who is:
In a marked crosswalk.
In any crosswalk or intersection.
Crossing any street.

Drivers must yield the right-of-way to pedestrians who are crossing the street in any marked or unmarked crosswalk. In the interest of safety, drivers should yield the right-of-way to people crossing any street.

22. While driving on a roadway with a single broken white centerline:
You must stay within your lane.
You may cross the centerline to change lanes.
You may change lanes only from the left lane.

White lines between lanes indicate that the lanes are traveling in the same direction. Broken white line markings indicate that it is legal to pass another vehicle when safe.

23. What is an important step in turning?
Check traffic in all directions.
Increase your speed.
Always move to the left lane.

When turning, you should look to the rear and both sides of your vehicle to ensure it is safe to proceed before making the turn. Adjust your speed to safely complete the turn.

24. It is legal to make a left turn at a red traffic light after stopping only if:
You are traveling on a two-way street and turning onto a two-way street.
You are traveling on a one-way street and turning onto another one-way street.
You yield to all other traffic at the intersection.

After coming to a complete stop, you may turn left at a red light only if you are traveling on a one-way street and turning onto another one-way street. Only make the turn if there are no posted signs prohibiting such a turn.

25. This sign shows one type of:
/data/image/dmv_image/car/georgia-t_intersection(2).png
Right turn.
Intersection.
Lane change.

Warning signs are usually yellow with black markings. This sign warns that your current road ends at an intersection straight ahead. Slow down and prepare to yield or stop before turning right or left.

Your Progress
  • 0Incorrect (5 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25