Maine CDL DMV Endorsement Hazmat 2

You should not smoke within 25 feet of a placarded cargo tank used to transport materials that are categorized as Class 3 (flammable liquids) or Division 2.1 (gases). Do not smoke or carry a lit cigar, pipe, or cigarette near a vehicle containing flammable or explosive materials.

Always protect containers of hazardous materials. When loading hazardous materials, never use equipment that could damage containers or packaging, such as hooks.

Packages that contain liquid containers must have orientation markers. Arrows displayed on the box should be pointing in the correct upright direction.

A placarded vehicle must have at least four identical placards: one on the front, one on the rear, and one on each side of the vehicle.

Except when parking briefly to perform necessary functions for vehicle operation (such as refueling), never park a vehicle carrying Division 1.1, 1.2, or 1.3 explosives within 300 feet of a bridge, tunnel, or building. Never park such a vehicle within five feet of the traveled portion of the road.

The National Response Center helps coordinate emergency response to chemical hazards. It should be contacted in the event of a hazardous materials spill.

When transporting hazardous materials, shipping papers should be kept in a pouch in the driver's side door, or in another location where the driver is able to easily reach them while their seat belt is fastened. The papers must be easily visible to anyone who is entering the cab.

Parts of a vehicle that have been exposed to corrosive liquids must be thoroughly washed with water.

If you discover a leak in a cargo of hazardous materials, identify the materials in question by using the shipping papers, labels, or package location. Do not touch the leaking material.

If you discover that a cargo of hazardous materials is leaking from your vehicle, you should park the vehicle as soon as possible. The longer you continue driving, the longer the trail of contamination becomes. While this creates potential danger and harm to others, it also increases clean-up expenses.

Always load hazardous materials away from heat sources. Be aware of regulations on explosive or flammable materials that prohibit them from being loaded in cargo spaces with heaters.

When experiencing a cargo fire, it may be a bad idea to open the doors to the trailer. Doing so allows oxygen to enter the area, potentially causing the fire to flare up and expand.

Packaging can be an indicator of whether or not materials are hazardous. Cylinders and drums are often used to hold and transport hazardous materials.

If the words "Inhalation Hazard" appear on the shipping paper or package, you must display the "Poison Inhalation Hazard" or "Poison Gas" placards, as appropriate.

One clue that a shipment may contain hazardous materials is that the shipper is in a line of business that involves such materials. Examples include paint dealers; chemical suppliers; scientific supply houses; pest control businesses; agricultural supply firms; and dealers in explosives, munitions, or fireworks.

Radiation will surround each package of radioactive materials and pass through to all nearby packages. The number of packages that can be loaded together is controlled.

Shipping papers must be quickly accessible in the event of an emergency. While driving, operators must keep the papers in a pouch on the driver’s door or in clear view and within immediate reach while their seat belt is fastened. Shipping papers may be kept on the driver’s seat when the driver is out of the vehicle.

A placard must be placed at least three inches away from any other markings. The placard should be kept clear of attachments or devices, such as doors and ladders. Placards should always be placed against a background of a contrasting color.

Information about hazardous chemicals is found in the Emergency Response Guide (ERG) provided by U.S. Department of Transportation (DOT). The ERG is indexed by the proper shipping names and identification numbers of substances.

Before loading or unloading a tank with flammable liquids, you should turn off the engine, unless running the engine is necessary to operate a pump. Ground the tank before opening the filling hole and maintain the ground until after closing the filling hole.

Shippers of hazardous materials are required to include an emergency response telephone number on shipping papers.

While the manual includes all of the information required to pass the hazardous materials knowledge test, you should consider reading the manual as only the first step to learning about the topic. You can learn more by reading and understanding the federal and state rules about the transportation of hazardous materials, as well as by attending hazardous materials training courses.

Containers of hazardous materials should be braced so they will not fall, slide, or bounce around during transportation.

A hazardous material will be placed into one of nine classes to explain the type of risks associated with the material.

If transporting any amount of chlorine, a driver must always stop at a railroad crossing 15 to 50 feet from the nearest track, regardless of the presence of a train.

Shippers should place applicable diamond-shaped hazard warning labels on hazardous materials packages. If a label will not fit entirely onto a package, shippers may instead place the label on a tag that is securely attached to the package.

You should use a floor lining when transporting Division 1.1, 1.2, or 1.3 materials. The floors must be tight and the liner must be made from either non-metallic material or non-ferrous metal. Non-ferrous metals are any metals that do not contain iron or iron alloys.

In general, vehicles carrying hazardous materials are required to display diamond-shaped warning signs on all four sides. These warning signs are called "placards."

If your vehicle breaks down while you are transporting explosives and you need to use warning signals, use reflective triangles or red electric lights. Never use burning signals, such as flares or fuses, when transporting explosives.

Fighting a hazardous materials fire requires special training and protective gear. Unless you have the proper equipment and training, do not try to fight a hazardous materials fire yourself.