Over 95% pass rate when practice at DMV Practice Test

Louisiana MOTORCYCLE DMV Practice Test 2

Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Louisiana DMV exam is by taking our free practice tests. The following question are from real Louisiana DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
16
Number of Question
25
Passing score
20
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. When riding at night, you should do all of the following, except:
Use your high beam.
Use the headlights of vehicles ahead to help you see.
Be visible.
Ride only in the left portion of your lane.

When riding at night, use your high beam (unless you are following or meeting another car), take advantage of the headlights of other vehicles, and wear reflective materials to increase your visibility. You should always be flexible about your lane position, selecting whichever position will help you to see, be seen, and have an adequate space cushion.

2. When riding under ideal conditions, you should maintain a minimum following distance of:
One second.
Two seconds.
Three seconds.
Four seconds.

Under normal conditions, you should maintain a following distance of at least two seconds. Increase your following distance any time conditions are less than perfect.

3. If your front tire locks while braking, you should:
Keep the brake engaged until you come to a full stop.
Release both brakes and coast to a stop.
Release the brake lever and use only the rear brake.
Release the brake lever until the tire regains traction.

If your front wheel locks while braking, you should release the brake lever until the tire regains traction and re-apply the brake.

4. When riding, you should:
Turn your head and shoulders to look through turns.
Keep your arms straight.
Keep your knees away from the gas tank.
Turn just your head and eyes to look where you are going.

When turning, look through the turn to where you want to go by turning only your head. Keep your knees against the gas tank to help maintain your balance while turning. Your arms should be slightly bent any time you are holding the handgrips.

5. When riding with a passenger, you should:
Assume the passenger has traveled by motorcycle before.
Not assume the passenger has traveled by motorcycle before and explain the process.
Not let them ask questions.
Not bother with explaining anything since they are only a passenger and not in control of the motorcycle.

A motorcycle passenger needs to understand how to ensure a safe ride ride for both themselves and the operator. An operator should never assume the passenger already knows what to do. Give a passenger complete instructions before every ride.

6. Helmeted riders are ________ more likely to survive than those not wearing helmets at the time of a crash.
Two times
Three times
Eight times
Ten times

At any speed, wearing a helmet will make you three times more likely to survive head injuries in the event of a crash than you would if not wearing a helmet.

7. When you are stopped, you:
Should remain in first gear.
Should remain in neutral.
Should remain in fifth gear.
Can remain in any gear.

Shift down through the gears with the clutch as you slow or stop. Remain in first gear while you are stopped so you can move quickly if needed.

8. When riding at night you should:
Increase your speed.
Decrease your following distance.
Use the vehicle in front of you to help see.
Wear tinted glasses.

To reduce the risk of a collision when riding at night, be sure to reduce your speed and increase your following distance. Use the headlights of vehicles ahead of you to see farther down the road. You should always be flexible about your lane position, especially when riding at night.

9. Which types of brakes do most motorcycles have?
Front and emergency
Rear and emergency
Front and rear
Only a front brake

Motorcycles generally have one brake for each wheel. The front brake carries more braking power than the rear brake.

10. In a normal turn:
The motorcycle and rider should lean together.
The motorcycle and rider should lean in opposite directions.
The motorcycle should lean, but the rider should not.
The rider should lean, but the motorcycle should not.

During normal turns, the motorcycle and the rider should be leaning together at the same angle. In slow, tight turns, only the motorcycle should lean while the rider keeps their body straight up.

11. Since most crashes happen during daylight hours, you should:
Not ride during the day.
Wear bright clothing all the time.
Ride on the shoulder and stay out of traffic.
Wear dark clothing all the time.

Most motorcycle crashes happen in broad daylight. You should always wear brightly-colored clothing when riding to maximize your chances of being seen, even during the day.

12. If a tire goes flat while you are riding and you must stop, you should:
Use both brakes and stop quickly.
Shift your weight toward the good tire.
Brake on the good tire and steer to the side of the road.
Relax on the handgrips.

If either of your tires go flat while you are riding, hold the handgrips firmly, ease off the throttle, and maintain a straight course. If you need to brake, gradually apply the brake to the tire that is not flat. As you slow down, edge to the side of the road, squeeze the clutch, and stop.

13. It is a good idea to wear reflective clothing:
At night.
During the day.
At dusk.
All of the above.

Wearing reflective and brightly-colored clothing is always a good idea when riding a motorcycle. Crashes occur in broad daylight and at night, so it is best to wear highly visible clothing at any time of day.

14. Your lane position should:
Avoid other road users' blind spots.
Provide a good view of the shoulder.
Provide a poor view of road hazards.
Invite others to share your lane.

A properly chosen lane position should help you to see others and be seen by them. Avoid riding in another driver's blind spot for a long period of time.

15. Several factors influence blood alcohol concentration (BAC). Which of the following does not play a role?
The amount of alcohol consumed
How fast a person drinks
Body weight
Height

There are several major factors that can affect a person's blood alcohol concentration (BAC). A BAC is determined in part by the amount of alcohol someone has consumed, how fast they consumed the alcohol, and their body weight.

16. At a minimum, how often should a motorcycle's hydraulic fluid be checked?
Once a day
Once a week
Once a year
Before every ride

Pre-ride motorcycle inspections are an important part of ensuring safe riding. Hydraulic fluids and coolants should be checked at least once a week.

17. Which of the following is true?
The front and rear brakes provide equal braking power.
The front brake provides more braking power than the rear brake.
The rear brake provides more braking power than the front brake.
Only the front brake should be used when braking.

The front brake of a motorcycle is more powerful than the rear one, providing at least 70 percent of the total stopping power. Always use both brakes any time you slow or stop.

18. If a tire goes flat and you must brake, you should:
Apply the brake of the tire that is not flat.
Apply the brake of the tire that is flat.
Apply both brakes.
Not use either brake.

If either of your tires go flat and you must brake, gradually apply the brake of the tire that is not flat (if you are certain of which tire that is).

19. For the best protection, jackets and pants:
Should cover your arms and legs completely.
Should be loose and flap in the wind while you are riding.
Should only partially cover your arms and legs.
Should be made of wool.

To provide adequate protection when riding, jackets and pants should cover your arms and legs completely. Your clothing should fit snugly but be loose enough to let you move freely. Leather or newer kinds of synthetic materials provide the best protection in the case of an accident.

20. When entering a highway or curve, motorcyclists riding in a group should:
Ride single-file.
Ride in a staggered formation.
Ride in pairs.
Ride in the far right portion of the lane.

While a staggered group formation is usually best, it is better to switch to a single-file formation when turning, taking curves, or entering or exiting a highway.

21. If you are being chased by a dog, you should:
Kick it away.
Stop until the animal loses interest.
Swerve around the animal.
Approach the animal slowly, then speed up.

Motorcycles often seem to attract dogs. If you are being chased by a dog, downshift and approach it slowly. Then, as you approach the dog, accelerate and leave it behind.

22. How is the accelerator controlled?
With the right hand
With the left hand
With the right foot
With the left foot

The accelerator of a motorcycle is located by the right handgrip and is controlled with the right hand.

23. When riding with a passenger, you should:
Ride faster than usual.
Rider more slowly than usual.
Start slowing later than usual.
Try to squeeze into smaller gaps in traffic.

The added weight of a passenger will affect the handling of your motorcycle. Expect your motorcycle to accelerate more slowly than usual, turn more slowly than usual, and require extra space to come to a complete stop. Ride more slowly, start slowing sooner when approaching a stop, open up a larger space cushion, and wait for larger gaps when crossing, entering, or merging into traffic.

24. If a friend has been drinking and wants to ride their motorcycle, you should:
Let them.
Encourage them to take less-crowded roads.
Push their bike over.
Encourage friends to talk them out of riding.

Never let someone ride if they have had too much to drink. Do whatever you can to prevent them from riding. It can be helpful to recruit a group of friends to intervene and apply peer pressure to the person.

25. When downshifting, you should:
Shift through multiple gears at a time.
Shift through one gear at a time.
Always shift all the way down to neutral first.
Accelerate.

When shifting into a lower gear, shift down one gear at a time and ease out the clutch through the friction zone between each downshift.

Your Progress
  • 0Incorrect (5 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25