Louisiana CDL DMV Endorsement Double 2
Take 10 practice tests for CDL is the best way to prepare for your Louisiana DMV exam is by taking our free practice tests. The following question are from real Louisiana DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
After a vehicle is started, the warning lights and buzzers should go out after a few seconds. If the warning signals do not turn off, there may be something wrong with the vehicle.
The doors of a trailer should be not be opened in the event of a cargo fire, especially if the cargo includes hazardous materials. Opening trailer doors would increase the fire's oxygen supply, potentially causing the fire to increase in size.
It is best not to avoid driving in fog. However, if you must drive under foggy conditions, be sure to decrease your speed.
Driving while fatigued can be extremely dangerous. Strategies for preventing drowsiness while driving include getting a full night's sleep before a trip; having someone ride with you; scheduling trips for times during which you are normally awake; and avoiding medications that may cause drowsiness. Exercising regularly can increase your energy levels and make you less likely to become tired while driving.
If you are attaching a second trailer to a combination, but you have doubts about the trailer's brakes, you should use wheel chocks to secure the trailer in place while coupling.
Always begin signaling well in advance of a turn. This is the best way to ensure that other drivers do not try to pass you. Without using a turn signal, drivers may assume that you are merely slowing down or stopping when you are planning to turn.
Converter dollies built on or after March 1, 1998 are required to have Anti-Lock Braking Systems (ABS). The presence of ABS will be indicated by a yellow lamp on the left side of the dolly.
The leading cause of injury and death in roadway work zones is excessive speed by passing drivers. Lower your speed when driving through a work zone.
When checking the tires as part of a pre-trip inspection, make sure the tires have sufficient tread. There should be at least 4/32 of an inch of tread in every major groove of the front tires, and at least 2/32 of an inch of tread depth on the other tires. Tire sizes should not be mismatched.
If used and maintained properly, air brakes are a safe and effective way to stop large, heavy vehicles.
Some air brake systems include an alcohol evaporator. The evaporator introduces alcohol into the braking system to prevent the formation of ice, which can cause damage.
Rust around wheel nuts can indicate that the nuts are loose. If you find rust near the wheel nuts, check their tightness before beginning to drive.
On a vehicle with one or more trailers, mirror adjustment can only be checked accurately if the trailers are straight. Mirror adjustment should be checked before the start of every trip.
If you experience an engine fire, you should turn off the engine as soon as safely possible. Avoid opening the vehicle's hood when extinguishing the fire.
If your brakes fail on a downgrade, you will need to quickly find something outside that can stop your vehicle. An escape ramp is the best option. If no escape ramp is available, use the least hazardous available option, such as driving into an open field or side road that flattens out or turns uphill.
To help avoid frustration, which can lead to aggressive driving behavior, you should begin a trip with realistic expectations about your travel time. Plan ahead to allow time for potential traffic delays. Other strategies to help prevent aggressive driving behavior include driving an appropriate speed and keeping a reasonable following distance; avoiding making gestures at other drivers; and keeping your hands on the steering wheel.
You should not rely solely upon the presence of warning signals, gates, or flaggers to alert you to the approach of a train. Be especially alert to approaching trains at crossings that are not controlled by gates or signals. At any railroad crossing, you should operate under the assumption that a train is coming.
When stopping, you should push the brake pedal down gradually. Braking gradually will help you to maintain proper control of your vehicle.
While regular mirror checks should be part of your normal driving routine, checking your mirrors is especially important when turning, changing lanes, merging, and performing tight maneuvers.
Rust around wheel nuts may mean that they are loose. Check the tightness of the nuts if you see any rust in the area.
Try more CDL Louisiana Practice Test
- 0Incorrect (4 allowed to pass)
- 0Correct