Kentucky MOTORCYCLE DMV Practice Test 16

Shift down through the gears with the clutch as you slow or stop. Remain in first gear while you are stopped so you can move quickly if needed.

Warning signs are yellow with black lettering or symbols and provide important information to motorists about upcoming road conditions.

You can achieve maximum stopping power by using both the front and rear brakes. You should use both brakes every time you slow or stop.

The front brake of a motorcycle is more powerful than the rear one, providing at least 70 percent of the total stopping power. Always use both brakes any time you slow or stop.

To be sure you are familiar with the specific type of motorcycle that you are planning to ride, read the owner's manual before riding it for the first time. This is particularly important if you are riding a borrowed motorcycle.

Because it is more difficult to see and judge distances in the dark than in daylight, you should maintain an expanded following distance of at least three seconds when riding at night. It may take you longer than usual to realize the vehicle in front of you has stopped and you may need additional time to slow or stop to avoid hitting the vehicle.

Oily drippings from cars collect in a strip in the center of each lane. Unless the road is wet, this area still generally offers enough traction for motorcyclists to safely ride. You should still avoid riding on big buildups of oil and grease, often found at busy intersections or near toll booths.

Because adding a load to a motorcycle increases its weight, the vehicle's inertia may increase, causing its stopping distance to increase. Begin slowing and stopping earlier when riding a motorcycle with a load or passenger in its sidecar.

When being passed, you should not ride on the side of your lane that is farthest from the passing vehicle. Doing so may tempt the driver to return to your lane before there is actually room for them to do so safely.

Because road and traffic conditions are always changing, the safest lane position is also always changing. Choose the position that will maximize your space cushion and allow other drivers to see you most easily.

For your protection, you should always wear a long-sleeved jacket when riding, even in warm weather when you may not think you need a jacket. It can help protect you against the sun and dehydration in hot weather.

It is particularly important for a rider to check their mirrors when slowing down or stopping, when stopped at an intersection, when changing lanes, and when turning.

It is never safe to operate a motorcycle after consuming any amount of alcohol. Impairment of the skills needed to safely ride begins well below the legal limit.

Oily drippings from cars collect in a strip in the center of a traffic lane. Unless the road is wet, this area will generally still provide enough traction for motorcyclists to ride safely. Because the strip is usually no more than two feet wide, it is often possible to ride to one side of the strip and still be in the center portion of the lane.

Any U.S. Department of Transportation-compliant helmet is required to have an impact-resistant outer shell, an impact-absorbing inner liner, a comfort liner, and a chinstrap retention system.

To be effective, an eye or face shield must be free of scratches; be resistant to penetration; allow clear views to both sides; fasten securely; permit air to pass through to prevent fogging; and allow room for eyeglasses or sunglasses, if needed.

To increase your chances of being seen at an intersection, use your headlight and ride in a lane position that creates the best view of oncoming traffic. Maintain a space cushion around your motorcycle that allows you to take evasive action.

When traveling in a group, it is never recommended for motorcyclists to ride in pairs. Neither rider will have adequate room to maneuver to avoid hazards.

Riding directly next to another vehicle is dangerous because you could be riding in the vehicle's blind spot. Additionally, the vehicle may block your route of escape if another hazard arises. If you find yourself riding directly alongside another vehicle, either speed up or drop back.

Riding between slowed or parked cars can leave you vulnerable to unexpected hazards, such as opening car doors or cars suddenly pulling into traffic. If a hazard arises, you will not have room to safely maneuver. Never travel on the shoulder of a road because other drivers will never expect you to be there.

When parking a motorcycle next to a curb, you should create at a 90-degree angle with the curb by touching your rear wheel to the curb.

Applicants for a motorcycle license will be exempted from the licensing skills test if they present evidence of successful completion of an approved rider training course that includes a similar test of skill.

It is dangerous to ride directly alongside a vehicle in another lane because you may be in the vehicle's blind spot and the driver will have no way of knowing you are there. It can also be dangerous because the vehicle may block your path of escape if another hazard arises.

When turning, look through the turn to where you want to go by turning only your head. Keep your knees against the gas tank to help maintain your balance while turning. Your arms should be slightly bent any time you are holding the handgrips.

You should stay well behind the vehicle in front of you, even when you are both stopped. This will give you room to escape if the vehicle backs up unexpectedly or if another vehicle approaches too quickly from behind.

Choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and be free of obvious defects.

When riding behind a car, you should position yourself so you can be seen in the other driver's rearview mirror. Riding in the center portion of the lane will generally ensure that you will appear in the middle of their rearview mirror, where the driver is most likely to notice you.

An effective face shield should be free of scratches, be resistant to penetration, allow clear views to both sides, fasten securely, permit air to pass through, and provide enough space for eyeglasses or sunglasses to be worn underneath. It is important for a face shield to permit the passage of air because an airtight face shield can create fogging and make it difficult for a rider to see.

A motorcycle must lean to make a turn. To make it lean in the appropriate direction, press the handgrip in the direction you want to turn.

Riding directly alongside another vehicle is dangerous because it may place you in the driver's blind spot. Additionally, the vehicle will block your path of escape.