Kentucky MOTORCYCLE DMV Practice Test 14

A staggered formation is generally the best way for a group to maintain close ranks while also allowing each rider to maintain an adequate cushion of space. A single-file formation is preferable when taking curves, turning, or entering or exiting a highway.

Blind spots, by definition, are areas that you cannot see by just looking in your mirrors. Turn your head to the side and check over your shoulder for vehicles in your blind spot before you change lanes.

Maintaining a cushion of space between your motorcycle and other vehicles on the road will give you a clearer view of any emerging hazards, more time to react to hazards, and more space to maneuver around them.

The front brake of a motorcycle is more powerful than the rear brake. The front brake supplies at least 70 percent of a motorcycle's total stopping power.

A staggered formation is the best way to keep ranks close while still maintaining an adequate space cushion for all riders. Ride in a single-file line when riding in curves, turning, or entering or leaving a highway. Never ride side-by-side with another rider.

The rear brake of a motorcycle is usually operated with the right foot.

Do not try to accelerate out of a wobble because doing so will only make the motorcycle more unstable. Instead, grip the handlebars firmly, slow down by gradually closing the throttle, move your weight as far forward and downward as possible, and pull off the road as soon as you can. Avoid applying the brakes, as this may also worsen the wobble.

Trying to accelerate out of a wobble is dangerous and will only make your motorcycle more unstable. Instead, grip the handlebars firmly (without trying to fight the wobble), gradually close the throttle to slow down, and move your weight as far forward and downward as possible. Pull off the road as soon as you can.

The only method that effectively reduces your BAC is not drinking alcohol for a period of time. Coffee, exercise, fresh air, and cold showers cannot reduce your BAC or change the effects of alcohol. They can help you remain awake, but they cannot change your BAC or make you sober.

When riding in a group, you should maintain close ranks but still keep an adequate space cushion around each rider.

Pre-ride motorcycle inspections are an important part of ensuring safe riding. Hydraulic fluids and coolants should be checked at least once a week.

The faster you drink, the more alcohol will accumulate in your body. It is never safe to operate a motor vehicle after drinking alcohol in any amount.

If your drive chain or belt fails, you will experience an immediate loss of power to the rear wheel.

Alcohol is a depressant. It slows down and impairs bodily functions, both physical and mental.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

The throttle of a motorcycle is usually located on the right handle grip. Be sure to know where all of your motorcycle's controls are located before riding.

To reduce the risk of a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle. Always be ready to avoid an unexpected hazard.

An increased following distance is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up to a longer following distance.

Never rely on eye contact as an assurance that a driver will properly yield to you. It is common for drivers to look directly at motorcyclists and still fail to notice them.

The front brake is much more powerful than the rear one and provides at least 70 percent of a motorcycle's total stopping power. Use both brakes every time you slow or stop.

Be sure to wear gear that can help you and your motorcycle to be spotted by other road users. Bright, reflective clothing can make it easier for others to see you.

For your protection, you should wear pants that cover your entire legs and are made of leather or another sturdy synthetic material. Clothing should fit snugly enough that it does not flap in the wind but not so snugly that it restricts your movement.

In a group of motorcyclists, riders with less experience should be positioned toward the front of the group, just behind the leader. This will allow more experienced riders to keep an eye on them without forcing the inexperienced rider to lead the group.

If you need to stop quickly, apply both the front and rear brakes at the same time.

To reduce the risk of a collision, always allow merging vehicles plenty of space to safely enter traffic. Change lanes away from the entrance ramp if there is room to do so safely. If there isn't another lane available, adjust your speed to open up space for the merging driver.

Inexperienced riders should ride near the front of a group, just behind the leader, so more experienced riders can keep an eye on them from behind.

In South Carolina, passengers under the age of 21 must wear a helmet and eye protection, though it is recommended that all motorcycle riders wear helmets and eye protection. Passengers should avoid wearing loose clothing that might catch on the motorcycle and should always lean with the operator when turning. Passengers should never be allowed to ride sidesaddle.

Wearing goggles provides protection for your eyes, but not for the rest of your face. A face shield provides protection for your whole face and is recommended above goggles. A windshield is not an adequate substitute for a face shield or goggles.

For riding, choose boots or heavy shoes that are tall and sturdy enough to cover and support your ankles. Heels should be low so that they won't catch on rough surfaces. Tuck in long laces so that they don't catch on the motorcycle's moving parts.

When riding on slippery surfaces, you should reduce your speed. Make certain to use both brakes when braking and avoid making sudden moves.