Kentucky MOTORCYCLE DMV Practice Test 11
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Kentucky DMV exam is by taking our free practice tests. The following question are from real Kentucky DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
To ensure you are getting the best protection, you should choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and have no obvious defects, such as cracks, loose padding, or frayed straps.
A plastic, shatter-resistant face shield can help protect your whole face in a crash. While goggles can protect your eyes, they won't protect the rest of your face. A windshield is not a substitute for a face shield or goggles.
The added weight of a passenger will affect the handling of your motorcycle. Expect your motorcycle to accelerate more slowly than usual, turn more slowly than usual, and require extra space to come to a complete stop. Ride more slowly, start slowing sooner when approaching a stop, open up a larger space cushion, and wait for larger gaps when crossing, entering, or merging into traffic.
Adjust your mirrors so you can see the lane behind you and as much as possible of the lane next to you. When properly adjusted, a mirror may show the edge of your arm or shoulder, but it’s the road behind you and to the side of you that is most important.
Choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and be free of obvious defects.
When preparing to pass another vehicle on its left, you should ride in the left portion of your lane. This will increase your line of sight and make you more visible to oncoming traffic.
To protect yourself against injury, you should wear a DOT-compliant helmet; face or eye protection; a jacket and long pants made of sturdy material; boots or shoes that are high and sturdy enough to cover and support your ankles; and gloves made of durable material.
When riding at night, travel at a slower speed than you would during the day under similar weather and traffic conditions. It can be difficult to see potential hazards in the dark, so slowing down can increase your chances of avoiding any hazards.
If either of your tires go flat while you are riding, hold the handgrips firmly, ease off the throttle, and maintain a straight course. If you need to brake, gradually apply the brake to the tire that is not flat. As you slow down, edge to the side of the road, squeeze the clutch, and stop.
An integrated braking system is a variant of a linked braking system. Partial front braking is applied whenever the rear brake is activated. Check your owner's manual for a detailed explanation of the braking system on your motorcycle.
To stop quickly, apply both brakes at the same time.
When turning, look through the turn to where you want to go by turning only your head. Keep your knees against the gas tank to help maintain your balance while turning. Your arms should be slightly bent any time you are holding the handgrips.
It is best to entirely avoid slippery stretches of road. However, if there is no way to avoid such an area, keep your motorcycle upright and proceed as slowly as possible.
Shifting to a lower gear causes an effect similar to using the brakes. For this reason, downshifting is also known as engine braking.
Longterm exposure to wind and engine noise can cause permanent hearing damage, even if the rider is wearing a full-face helmet. Wearing ear plugs or other hearing protection can guard against damage while still allowing the wearer to hear important sounds like horns and sirens.
Instead of mechanical turn signals, operators may use hand signals to indicate turns or stops. If an operator's left arm is bent at the elbow and pointing upward, it means the operator plans to turn right or change lanes to the right.
You should use a tire gauge to check the tire pressure before every ride. An under-inflated tire may still look okay, so a visual check is not enough.
Engine braking by smoothly downshifting can be a useful option for motorcyclists. If you choose to engine brake, apply your brake lights separately to let other drivers know that you are slowing down.
When riding on slippery surfaces, reduce your speed, brake using both brakes, and avoid sudden moves. Avoid the center of the lane and instead follow tire tracks left by cars. Always keep an eye out for hazards that may make a road surface especially slippery, such as oil spots and loose gravel.
Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; painted lane markings; and metal covers and plates in the road can be slippery surfaces. Motorcyclists should ride with extra caution when riding over slippery surfaces.
A motorcycle needs to lean in order to turn. To make this happen, press on the handgrip in the direction you want to turn.
When traveling faster than a walking pace, your motorcycle will need to lean to turn. Pressing the grip in the direction you want to turn will cause you to lean in the appropriate direction
The cornering characteristics of a three-wheeled motorcycle or a motorcycle with a sidecar differ from those of a two-wheeled motorcycle.
Riders in a group should overtake another vehicle one at a time. Each rider should complete their pass and resume their position in the group formation before the next rider begins to pass.
Generally, you should maintain a minimum following distance of two seconds. Increase your following distance to at least three seconds whenever you are riding under conditions that are less than ideal.
A small technical fault can have much more serious consequences on a motorcycle than on a car. To avoid these consequences, inspect your motorcycle before every ride.
Road and traffic conditions can change at any time. Always be prepared to change your lane position as appropriate no matter where you are on a roadway. The best path through a curve does not necessarily follow the curve of the road.
Small vehicles, like motorcycles, can visually seem to be farther away and moving more slowly than they actually are. This phenomenon can make it difficult for others on the road to accurately judge the location and speed of a smaller vehicle.
A linked braking system connects the front and rear brakes on a motorcycle. This system applies braking pressure to both brakes when either the front or rear lever is used. Check your owner's manual for a detailed explanation of the braking system on your motorcycle.
An expanded cushion of space is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up to a larger following distance.
- 0Incorrect (6 allowed to pass)
- 0Correct