Kentucky CAR DMV Practice Test 2
Take 24 practice tests for CAR is the best way to prepare for your Kentucky DMV exam is by taking our free practice tests. The following question are from real Kentucky DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
If it feels like your tires have lost contact with the surface of the road, you should ease your foot off the gas pedal and stay off the brakes. Do not try to stop or turn until your tires are gripping the road again.
When driving in a work zone, keep a safe distance between your vehicle and traffic barriers, trucks, construction equipment, workers, and other vehicles. Increase your following distance and do not tailgate.
Regulatory signs provide notice to road users of traffic laws that must be obeyed. Where this sign is present, drivers must drive in the direction indicated by the arrow.
When leaving an alley, driveway, or parking lot to enter a roadway, you must stop before driving onto a sidewalk or sidewalk area. Pedestrians and existing traffic have the right-of-way.
Motorcycles can stop quickly and following them too closely endangers your life and that of the motorcyclist. If the motorcyclist makes a mistake, you need to have enough time and space to avoid a crash.
Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns drivers that the number of lanes is reduced ahead and that traffic should merge left.
Before changing lanes, check for drivers trying to pass you who may be trying to enter the same lane as you. Look over your shoulder to check your blind spot. You should never attempt to pass or otherwise change lanes in an intersection.
When making a left turn, you should always begin signaling about 100 feet before the turn. You should keep your front wheels aiming straight ahead until it is safe to start your turn. This ensures that you will not be pushed into oncoming traffic if another vehicle hits you from behind.
When encountering a flashing yellow light at an intersection, you should slow down and proceed with caution. You do not need to come to a complete stop when approaching a flashing yellow light.
This sign informs drivers that they are leaving a divided roadway and approaching a two-way highway.
A round sign means you are approaching a railroad crossing. This sign is posted a few hundred feet in front of the tracks and tells drivers to slow down, look, listen, and prepare to stop.
Reduce your speed and be prepared to slow down or stop for highway equipment. Driving carefully through work zones improves safety for drivers, pedestrians, bicyclists, and road workers.
If your vehicle begins to skid, stay off the brakes. Continue to correct your steering until the vehicle is back under your control and moving safely down the road.
You may not know what is on the other side of a hill or just around a curve, even if you have driven the road many times. If a vehicle is stalled just out of sight on the roadway, you must be able to stop. Whenever you come to a hill or curve, adjust your speed so you can stop if necessary.
Warning signs are usually yellow with black markings. This sign warns that merging traffic will be entering from the right, so drivers should prepare to allow the incoming traffic to safely merge.
A flashing yellow traffic light means drivers must slow down, be more aware, and proceed with caution. Be alert to crossing traffic and pedestrians.
Your suspension helps you control your vehicle and provides a comfortable ride over varying road surfaces. If your vehicle bounces a lot after driving over a bump, or is generally hard to control, you may need new suspension parts.
A broken yellow line alongside a solid yellow line means that traffic in the lane next to the broken line may cross the line to pass, while traffic in the lane next to the solid line may not.
Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign tells drivers to prepare to allow traffic to safely merge from the right.
Drivers of trucks, buses, vans, or any vehicles pulling campers or trailers may not be able to see you if you are driving directly behind them. Increase your following distance when driving behind one of these vehicles. Additionally, large vehicles can block your view of the road, so increase your following distance to look around the sides of the vehicle and see the road ahead.
An octagonal sign always means stop. When approaching a stop sign, you must come to a complete stop at the marked stop line and proceed only when it is safe to do so. If there is no stop line, stop before the crosswalk. If there is no crosswalk, stop before the intersection at a point from which you can see oncoming traffic.
Before changing lanes, signal, look in all your mirrors, and look over your left or right shoulder to make sure the lane next to you is clear. Looking over your shoulder is a way to check your blind spot to be sure there is no vehicle, motorcycle, or bicycle traffic in the next lane.
Even if you are facing a green traffic light, do not start across the intersection if there are other vehicles blocking your way. If you are caught in the intersection when the light changes to red, your vehicle will block cross traffic. You can get a ticket for blocking an intersection.
When turning left at an intersection, yield the right-of-way to oncoming traffic and pedestrians. Once the intersection is clear and applicable signals allow, you may complete the turn.
Instructions given by police officers directing traffic always override posted traffic signals and signs. Follow the officer's instructions.
Driving at night is more hazardous than daytime driving because the lowered visibility makes it difficult to judge speed, distances, and other potential hazards. Increase your following distance to help prevent a potential collision if the vehicle in front of you should stop abruptly. Use your headlights when driving at night, following the rules for proper usage of high beams and low beams.
You should always signal when moving your vehicle to the right or left. On an interstate, you should stay in the right lane if you are moving more slowly than the surrounding traffic. It is illegal to back up or make a U-turn on interstate highways, so if you miss your exit, you should proceed to the next exit.
If you start to feel tired while driving, drive to the first available rest stop or service area to take a break, nap, stretch, or change drivers. You should not rely on caffeine pills or energy drinks, as these are not a replacement for rest and may make your driving even more dangerous.
If an oncoming driver fails to dim their headlights, look toward the right side of the road. This will keep you from being blinded by the other vehicle’s headlights and allow you to see enough of the road to stay on course. Do not try to retaliate by keeping your bright lights on.
Night driving creates a unique set of problems for drivers. Due to the reduced visibility, it can be difficult to judge distance and the traveling speeds of other vehicles when driving at night. Drivers can see only as far as their headlights allow.
It is important to remember that driving is a privilege and that all drivers play a role in ensuring that everyone remains safe on the roadways. If you prove to be abusive of that privilege, the privilege may be revoked.
Warning signs provide notice to road users of a situation that might not be readily apparent and are usually yellow with black markings. This sign alerts drivers to the right lane ending and tells them to prepare for potential merging traffic.
Pentagonal signs mean you are approaching a school zone and/or school crossing. When you see these signs, be alert and prepare to stop.
When driving in heavy rain at speeds as low as 30 mph, your tires may lose all contact with the road and instead ride up on a layer of water above the surface of the road. This is called "hydroplaning." If your vehicle starts to hydroplane, slow down gradually and do not apply the brakes.
Signs with a red circle and diagonal line over a black symbol indicate that the action represented by the symbol is prohibited. In this case, the sign indicates that left turns are prohibited.
Before you return to your driving lane, be sure you are not dangerously close to the vehicle you have just passed. One way to do this is to look for the vehicle in your inside rearview mirror. When you can see both headlights in your rearview mirror, you may have enough room to return to your driving lane.
To prevent hydroplaning, lower your speed in response to wet roads and keep your tires in good condition. If you detect a loss of control, take your foot off the gas, do not apply the brakes, maintain the direction of the vehicle, and allow the vehicle to slow to a manageable speed.
When driving in a work zone, adjust your speed for the traffic conditions and don't follow other vehicles too closely. Be attentive to workers and machines in the work zone.
Drivers must always yield the right-of-way to pedestrians in the roadway, even if there is not a marked crosswalk.
This sign prohibits right turns. It is illegal to turn right at an intersection where this sign is posted.
Try more CAR Kentucky Practice Test
- Practice test 1
- Practice test 2
- Practice test 3
- Practice test 4
- Practice test 5
- Practice test 6
- Practice test 7
- Practice test 8
- Practice test 9
- Practice test 10
- Practice test 11
- Practice test 12
- Practice test 13
- Practice test 14
- Practice test 15
- Practice test 16
- Practice test 17
- Practice test 18
- Practice test 19
- Practice test 20
- Practice test 21
- Practice test 22
- Practice test 23
- Practice test 24
- 0Incorrect (8 allowed to pass)
- 0Correct