Over 95% pass rate when practice at DMV Practice Test

Kansas MOTORCYCLE DMV Practice Test 9

Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Kansas DMV exam is by taking our free practice tests. The following question are from real Kansas DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
16
Number of Question
25
Passing score
20
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. If you have only one drink before riding:
You cannot be arrested for drinking and riding.
Your riding skills will not be affected.
It can affect your ability to operate a motorcycle.

Impairment of riding skills begins with the first drink. If you have consumed alcohol in any amount, it is not safe to ride.

2. A good way to handle a tailgater is to:
Encourage the tailgater to pass by slowing down or changing lanes.
Speed up to put distance between you and the tailgater.
Ignore the tailgater.

If you can do so safely, change lanes and let the tailgater pass. Speeding up may only result in them continuing to tailgate you at a higher speed, increasing the danger.

3. To make it easier to be seen by other motorists, you should:
Wear brightly-colored clothing while riding.
Wear darkly-colored clothing while riding.
Wave your arms while riding.

Wearing brightly-colored clothing while riding will make it easier for others on the road to see you. This is true regardless of the time of day.

4. You have an improved chance of avoiding serious injury in a crash if you wear:
Face or eye protection.
A baseball cap.
Sneakers.

Wearing a helmet is your best defense against injury while riding a motorcycle. Wearing a plastic, shatter-resistant face shield can help protect your face from injury in a crash.

5. Riding on ______ may provide poor traction.
Pavement markings
Dry pavement
The roadway under a bridge

Traction may be poor on surfaces such as wet, snowy, icy, or muddy pavement; gravel roads; lane markings; and steel plates and utility hole covers.

6. What type of footwear is the best for motorcycle riders?
Sneakers
Leather boots
Sandals

Leather boots provide the best degree of protection when riding. They should be high and sturdy enough to cover and support your ankles.

7. When it starts raining, it is best to:
Get off the road.
Ride in the tire tracks left by other vehicles.
Ride in the center portion of the lane.

When it starts to rain, avoid riding in the center of the lane. Instead, ride in the tire tracks left by cars ahead of you. The left tire track is often best for riding, but this can vary based on traffic and other conditions.

8. When looking through a turn, you should:
Turn your head and shoulders.
Turn just your head.
Turn your head, shoulders, and torso.

Look through every turn by turning just your head, not your shoulders, and keeping your eyes level with the horizon.

9. Taking a turn too fast can cause a rider to:
Accidentally end up in another lane of traffic.
Get through the turn faster.
Keep control of their motorcycle.

Taking a turn too fast may cause a rider to cross into another lane of traffic, or even leave the road entirely. It is important to slow down before entering a turn or curve.

10. When riding with a group of motorcyclists, a staggered formation:
Is recommended at all times.
Should not be used when entering or exiting a highway.
Should be used when riding in curves.

While riding in a staggered formation is generally advisable, a group of motorcyclists should switch to a single-file formation when riding in curves, turning, and entering or leaving a highway.

11. Before riding, a motorcycle operator should check the clutch. A properly working clutch should feel:
Loose and rough.
Tight and smooth.
Loose and smooth.

Check your clutch and throttle before riding your motorcycle. The throttle should snap back when you let go and the clutch should feel tight and smooth.

12. When being passed from behind, which portion of the lane should you ride in?
Right
Center
Left

When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.

13. If traveling with a load, the load should be:
Secured as low as possible.
Secured as high as possible.
Attached to a sissy bar.

If not carried in saddlebags, loads should be secured as low as possible. Attaching a load to a sissy bar can raise the motorcycle's center of gravity and upset its balance.

14. Stopping in a turn can be difficult because:
There is decreased traction available for stopping while the bike is leaning.
The rider is usually focused on the turn and not on the braking.
The brake controls do not work in turns.

It is possible to use both brakes while turning, but it must be done with great care. Some of the usual traction is being used to make the turn while the motorcycle is leaning, so less traction is available for stopping.

15. When scanning the area around your motorcycle, you should:
Look for potential escape routes near intersections, shopping areas, or schools.
See if you can travel faster than other vehicles.
Stare at pedestrians.

While searching the road for potential hazards, focus on looking for escape routes in or around intersections, shopping areas, schools, and construction zones.

16. If possible, do not ride directly next to another vehicle because:
Another driver may want to use your lane to pass.
You may be in the vehicle’s blind spot.
You may have access to escape routes.

Riding directly alongside another vehicle is dangerous because you may be in the vehicle's blind spot and the driver will not know you are there. Additionally, the vehicle may block your route of escape if any hazards should arise.

17. You should flash your brake light to:
Tell other motorists that you are riding near them.
Help other motorists see your motorcycle while traveling in slow traffic.
Tell other motorists that you are going to slow down or stop where they don't expect you to do so.

Motorcycle riders should use their brake lights to communicate with other road users. It is particularly important for a motorcyclist to flash their brake light before slowing down to make a tight, fast turn off of a high-speed roadway. Motorcyclists should flash their brake lights when slowing in any location where other drivers may not expect them to slow down.

18. One problem with a motorcyclist riding directly next to another vehicle is that:
The other vehicle may block the motorcyclist's escape route.
The motorcyclist can be easily seen by other drivers.
The motorcyclist may not be able to read signs on the side of the road.

Riding alongside another vehicle is dangerous because the vehicle could veer into your lane and sideswipe you. Additionally, the vehicle could block your escape route if a hazard arises.

19. To help others see your motorcycle, you should:
Use your headlight.
Weave in your lane.
Maintain eye contact with other road users.

Riding with your headlight activated is the best way to help other road users see your motorcycle. Always be sure your headlight works before starting your trip.

20. You should maintain an increased following distance:
If the pavement is slippery.
If traffic is light.
If you can see through the vehicles in front of you to determine traffic conditions.

An expanded cushion of space is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up to a minimum four-second following distance.

21. Which brake is more powerful on a motorcycle?
The front brake
The rear brake
Both brakes are equally powerful.

The front brake of a motorcycle is more powerful that the rear brake and can provide at least 70 percent of the bike's total stopping power.

22. A pre-ride inspection:
Takes only minutes.
Takes about an hour.
Should only be done by a certified mechanic.

You should do a pre-ride inspection of your motorcycle before every ride. This will usually take only a few minutes.

23. Your motorcycle should fit you, meaning:
Your fingertips should barely reach the handlebars when you are seated on the motorcycle.
The seat should be one foot higher than your waist when you are standing next to the motorcycle.
Your feet should comfortably reach the ground when you are seated on the motorcycle.

A motorcycle fits you appropriately if your feet comfortably reach the ground while you are seated. Be sure a motorcycle fits you before riding.

24. When traveling in a group, riders should generally be:
In a single-file formation.
Paired up.
In a staggered formation.

In general, a staggered formation is the best way for a group of riders to maintain close ranks while allowing adequate space cushions for each rider. A single-file formation is best when taking curves, turning, entering a highway, or exiting a highway.

25. A motorized scooter can:
Only be operated during the day.
Be operated without a driver license.
Be operated with any class of driver license.

In California, motorized scooter can be used by anyone possessing any class of driver license.

Your Progress
  • 0Incorrect (5 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25