Kansas MOTORCYCLE DMV Practice Test 2
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Kansas DMV exam is by taking our free practice tests. The following question are from real Kansas DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
Keep your head and eyes up when riding through a work zone. Ride slowly over the grooved pavement.
All motorcycles are at least somewhat different. Before riding a motorcycle that is new to you, take the time to learn where all of the controls are. Ride the motorcycle in a controlled area to get used to it before taking it out on the road.
Before beginning your ride, tell your passenger to maintain a firm grasp on your hips, waist, or belt. If there are secure handholds for your passenger, they may also hold those.
A rider should always maintain a cushion of space appropriate for conditions. Motorcycles need as much room to stop as other vehicles.
It is best to change gears before entering a turn. If you must change gears while in a turn, be sure to do so smoothly.
When riding, you should be positioned so that you are able to easily operate all controls. Sit with your arms slightly bent and use your arms to steer rather than to hold up your body. Keep your knees against the gas tank to help maintain your balance during turns.
Every bike is a little different, so don't start riding an unfamiliar motorcycle without first familiarizing yourself with how it operates. Do a safety and maintenance check; find out where everything is located; and work the throttle, clutch, and brakes a few times to learn its gear pattern.
If the front wheel locks up while you are braking, release the pressure from the front brake. Immediately re-apply pressure to the brake with controlled gradual pressure.
To provide maximum grip and protection, riding gloves should be made of leather or a similar durable material.
Convex mirrors are installed on many motorcycles. Compared to flat mirrors, convex mirrors provide a wider view of the road. However, convex mirrors can also make approaching vehicles seem farther away than they actually are.
To reduce the risk of a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle.
When passing a row of parked cars, the left portion of the lane is generally safest for travel. This position will help you avoid hazards like doors being opened, people stepping out from between the parked cars, and cars pulling out of parking spaces. Always be ready to adjust your lane position to respond to changing road and traffic conditions.
Riding directly alongside another vehicle is dangerous because you may be in the vehicle's blind spot and the driver will not know you are there. Additionally, the vehicle may block your route of escape if any hazards should arise.
Any time a motorcycle is leaning, such as in a turn or curve, there is less traction available for braking. Both brakes may still be used while a motorcycle is turning, but it must be done with great care.
When passing a row of parked vehicles to your right, you may ride in the left portion of your lane. This way, you can more easily avoid opening doors, drivers getting out of vehicles, or people stepping out from between vehicles. Only ride in the left portion of the lane if there is no oncoming traffic.
If you accidentally lock your rear wheel while stopping on a straightaway, you can keep it locked until you have completely stopped. Even with a locked rear wheel, you can usually control your motorcycle if it is upright and traveling in a straight line.
Oil drippings and debris from cars and trucks often collect in the center portion of a lane.
To determine upcoming road conditions when riding at night, use the vehicle ahead of you. For example, the headlights of the vehicle may provide a better view of the road than your own high beam. If the vehicle's taillights bounce up and down, this indicates the presence of bumps on the road.
The best way to stop quickly is to apply controlled pressure to both the rear and front brakes at the same time. Be careful not to lock the brakes in the process.
Leather boots provide the greatest degree of foot protection when riding. Boots should be high and sturdy enough to cover and support your ankles.
A plastic, shatter-resistant face shield can protect your face in the event of a crash. It also provides protection against more routine hazards, such as pebbles thrown up from other vehicles, wind, dust, dirt, rain, and insects.
Motorcyclists may pass on the right if there is unobstructed pavement with a width of at least eight feet to the right of the vehicle being passed. Motorcyclists, and other drivers, should never leave the road to pass another vehicle.
Impairment of riding skills begins with the first drink. If you have consumed alcohol in any amount, it is not safe to ride.
A head or neck injury is always a risk when riding a motorcycle, regardless of your speed of travel. With few exceptions, the risk of head and neck injuries is greatly reduced by properly wearing a quality helmet.
Most motorcycle crashes happen in broad daylight. Wearing bright colors and reflective materials is always recommended when riding, even during the day.
- 0Incorrect (5 allowed to pass)
- 0Correct