Kansas CDL DMV Endorsement Hazmat 1
Take 10 practice tests for CDL is the best way to prepare for your Kansas DMV exam is by taking our free practice tests. The following question are from real Kansas DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
Carriers and drivers must be able to quickly identify hazardous materials' shipping papers. Shipping papers for hazardous materials should be on the top of a stack of shipping papers.
A driver transporting chlorine in cargo tanks must keep an approved gas mask and an emergency kit in their vehicle.
Parts of a vehicle that have been exposed to a corrosive material must be thoroughly washed with water.
When the vehicle is being driven, hazardous materials' shipping papers must be kept in a pouch on the driver's door or somewhere else that is in clear view and within the driver's reach. If the driver is outside of the vehicle, the shipping papers should be kept on the driver's seat.
During the vehicle inspection test, you must use a tire gauge to check for proper tire inflation. You will not receive passing credit if you simply kick the tires.
During the on-road driving skills test, make sure you do not put your vehicle over curbs, sidewalks, or lane markings. Stop behind stop lines, crosswalks, or stop signs. On multiple-lane roads, complete turns in the proper lane. Always move to or remain in the rightmost lane, unless the lane is blocked.
During the on-road driving skills test, you will be asked to pull your vehicle over to the side of the road and stop as if you were going to get out and check something on your vehicle. As you prepare to make this stop, you must check traffic; activate your turn signal; decelerate smoothly with even braking, changing gears as needed; and bring your vehicle to a full stop without coasting.
If you are experiencing a truck fire, you should not attempt to open trailer doors without first feeling the doors to see if they are hot. If the doors are hot, there may be a cargo fire. Leave the doors closed if there is a cargo fire.
The loading and unloading of a tank must be watched by a qualified person. They must be alert; have a clear view of the tank; stay within 25 feet of the tank; know the hazards of the materials involved; know the procedures to follow in an emergency; and be authorized and able to move the tank if necessary.
The examiner will score the number of times your vehicle touches or crosses an exercise boundary line. Each encroachment will count as an error, resulting in points against your skills test score.
When crossing railroad tracks during the on-road driving skills test, you must not stop, switch gears, pass another vehicle, or change lanes while any part of your vehicle is in the crossing.
During the on-road driving skills test, you may be asked to enter an expressway. Before doing so, you must check traffic, use proper signals, and merge smoothly into the proper lane.
A shipping paper describes hazardous materials being transported. Shipping orders, bills of lading, and manifests are all shipping papers.
If a shipping paper describes both hazardous and non-hazardous materials, the hazardous materials must be distinguished in one of three ways. They must be entered first on the shipping paper, highlighted in a contrasting color, or marked with an "X" in a column titled "HM."
If the letter “G,” for "Generic," is written in Column 1 of a shipping paper, the technical name of the associated hazardous material must also be listed.
You should finish each exercise with your vehicle in the exact position described by the examiner. You can be penalized for failing to complete an exercise exactly in the manner described by the examiner, potentially resulting in failure of the basic control skills test.
Shippers must retain a physical copy or an electronic image of hazardous materials shipping papers for a minimum of two years after the materials are accepted by the initial carrier. For hazardous waste, this increases to three years.
Because of the risks presented by the nature of the materials, government on federal, state, and local levels may impose regulations on the transportation of hazardous materials.
When checking the oil pressure gauge as part of a vehicle inspection test, you must ensure that it is working. The gauge should show increasing or normal oil pressure, or the oil pressure warning light should turn off. If equipped with one, the oil temperature gauge should begin a gradual rise to the normal operating range.
Cargo tanks remain on a vehicle at all times, regardless of whether or not they are carrying cargo. Portable tanks are bulk packaging and are not permanently attached to a vehicle.
While shippers of hazardous materials are responsible for providing necessary placards, it is the driver's responsibility to actually place them on the vehicle.
During a vehicle inspection test, you must ensure that all lug nuts are present, free of cracks and distortions, and showing no signs of looseness, such as rust trails or shiny threads. Verify that all bolt holes are free of cracks and distortions.
If you are asked to complete an offset back/left parking maneuver, you should first pull straight forward, then back up to the left. Your vehicle must be parked completely within the boundaries of the parking space.
If you drive under an overpass during the on-road driving skills test, your examiner may ask you to recall the posted clearance or height of the overpass.
One clue that a shipment may contain hazardous materials is that the shipper is in a line of business that you would expect to involve hazardous materials. Examples of such businesses include paint dealers, chemical supply businesses, or pest control firms.
Hazardous materials are products that pose risks to health, safety, and property during transportation. Materials that are considered hazardous include explosives; flammable and poisonous gases; and flammable and other hazardous solids.
Before loading or unloading a tank with flammable liquids, you should turn off the engine, unless running the engine is necessary to operate a pump.
Keep liquid discharge valves on a compressed gas tank closed, except when loading and unloading.
Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.
It is the responsibility of a carrier to refuse improper shipments of hazardous materials.
Try more CDL Kansas Practice Test
- 0Incorrect (6 allowed to pass)
- 0Correct