Indiana MOTORCYCLE DMV Practice Test 9
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Indiana DMV exam is by taking our free practice tests. The following question are from real Indiana DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
Placing a load too high on a motorcycle will raise the motorcycle's center of gravity and risk upsetting its balance.
Because motorcyclists are more vulnerable than the drivers of cars and trucks, appropriate use of signals by motorcyclists is even more important than it is for other drivers.
Before setting off on any ride, you should do a thorough check of your motorcycle. Inspect the tires, oil and fluid levels, headlight, tail light, turn signals, brake light, clutch and throttle, mirrors, brakes, and horn.
To be adequately protected while riding, you should wear a jacket and pants that completely cover your arms and legs.
Appropriate clothing can reduce the risk of injury in a crash. Choose a jacket and pants that cover your arms and legs, are made of sturdy material, and are snug enough that they do not flap in the wind.
Oily drippings from cars and trucks build up in the center of each lane. Unless the road is wet, this strip usually still provides enough traction more a motorcycle to operate safely. The strip is generally narrow enough that you can ride to either side of it and still be in the center portion of the lane.
All motorcycles are slightly different, so you should check the controls and make sure you know the gear pattern before riding an unfamiliar motorcycle. Work the throttle, clutch, and brakes a few times prior to riding.
If someone is following you too closely, it is a good idea to flash your brake light before slowing down. A tailgater may be concentrating on you and not see upcoming hazards that require traffic to slow down.
Strategies for safely riding at night include reducing your speed, increasing your following distance, using the lights of the car ahead to help see farther down the road, using your high beam headlight (unless following or meeting another vehicle), and being flexible about your lane position.
Before setting off on any ride, you should do a thorough check of your motorcycle. Inspect the tires, oil and fluid levels, headlight, tail light, turn signals, brake light, clutch and throttle, mirrors, brakes, and horn.
Usually, the best way to handle a tailgater is to get them in front of you. If you can do so safely, change lanes and let them pass. Speeding up may only increase the danger by encouraging them to follow you at a faster speed.
Oily drippings from cars and trucks collect in a strip in the center portion of a lane. This strip usually still provides enough traction for motorcyclists to operate safely, except when the road is wet. The strip is usually narrow enough that you can ride to its side and still be in the center portion of the lane.
To help keep the operator focused on riding, passengers should avoid unnecessary conversation or movement. Passengers should get on a motorcycle only after the engine has been started. They should sit as far forward as they can without crowding the operator and hold firmly onto the operator's waist, hips, or belt.
There are several advantages to keeping groups of riders small. In comparison to a large group, a small group is easier for other vehicles to pass safely, is less likely to get separated by traffic or stop lights, and creates less need for slower riders to hurry to catch up to the rest of the group.
Intersections present the greatest potential for conflict between motorcyclists and other drivers. Riders should use extra caution when approaching and riding through intersections.
Blind spots, by definition, are areas that you cannot see by just looking in your mirrors. Turn your head to the side and check over your shoulder for vehicles in your blind spot before you change lanes.
When taking a long trip, be sure to schedule in frequent breaks to rest and try not to ride more than six hours in one day. Wind, cold, and rain can make you tire quickly, so be sure to dress to protect yourself from the elements. Avoid taking artificial stimulants, as the effects when they wear off can be very dangerous.
The best way to handle a tailgater is to change lanes and let them pass you. Speeding up may cause them to tailgate you at a higher speed, only increasing the danger.
The greatest potential for conflict between your motorcycle and other traffic is at intersections. Be extra alert when riding somewhere where another vehicle may cross in front of your path of travel.
The accelerator of a motorcycle is located by the right handgrip and is controlled with the right hand.
Goggles and face shields can protect a rider's eyes from the wind. Windshields, eyeglasses, and sunglasses generally do not shield a rider's eyes adequately enough.
When riding, wear boots or shoes that are high and sturdy enough to cover and support your ankles. Heels should be short so they don't catch on rough surfaces. Laces should be tucked in so they can't catch onto the moving parts of the motorcycle.
You should not carry a passenger unless your motorcycle has a seat that is large enough for two riders. The motorcycle should be equipped with footrests for the passenger. Your passenger should wear the same kind of protective gear that is recommended to operators.
Replace any helmet that has been worn during a crash.
You must use proper turn signals every time you turn or change lanes, even if you think your intentions are obvious. Signals are always important, even if no one else seems to be around to see them. There may be other vehicles nearby that you can't see or haven't yet noticed.
- 0Incorrect (5 allowed to pass)
- 0Correct