Idaho MOTORCYCLE DMV Practice Test 3

When passing a row of parked cars, the left portion of the lane is generally safest for travel. This position will help you avoid hazards like doors being opened, people stepping out from between the parked cars, and cars pulling out of parking spaces. Always be ready to adjust your lane position to respond to changing road and traffic conditions.

The more weight being carried by a motorcycle, the more time the motorcycle takes to accelerate and decelerate. Your motorcycle will respond to your commands more slowly when carrying a passenger than it will when you are the only person on the bike.

Long-term exposure to engine and wind noise while riding can lead to hearing damage, even if you wear a full-face helmet. Using hearing protection is advised to prevent damage.

The best way to deal with a tailgater is to allow them to pass you. Speeding up may only result in them continuing to tailgate you at the higher speed, which is even more dangerous.

Like any vehicle, motorcycles have blind spots. In addition to using your mirrors, you must always turn your head to check your blind spot before changing lanes.

The best way to handle a tailgater is to allow them to pass you. Speeding up may result in them continuing to tailgate you, just at a higher speed.

Keep your feet firmly on the footrests for balance. The motorcycle should be equipped with passenger footrests. Firm footing prevents your passenger from falling off and pulling you off, too.

In general, it is best for a group to ride in a staggered formation. Move into a single-file formation when taking a curve, making a turn, entering a highway, or leaving a highway.

Impairment of riding skills begins with the first drink. If you have consumed alcohol in any amount, it is not safe to ride.

Your feet should remain on your footrests while riding to help you maintain proper balance.

If steering suddenly feels heavy, it is possible that your front tire has gone flat. Stop riding and check your tires as soon as possible.

On a two-lane road, a group of motorcyclists should pass another vehicle one at a time. Each motorcyclist should complete the pass before another begins to pass.

A motorcycle that is carrying a passenger will handle differently than usual due to the added weight of the additional rider. An operator should ride at slower speeds and allow more time and distance to slow down and stop. A passenger should hold firmly and securely onto the motorcycle's passenger handgrips or onto the operator's waist, hips, or midsection.

Before beginning your ride, tell your passenger to maintain a firm grasp on your hips, waist, or belt. If there are secure handholds for your passenger, they may also hold those.

Your motorcycle’s brake light is usually not as noticeable as that of a larger vehicle, especially when the taillight is on. Be aware that surrounding drivers may not notice your brake light.

On a slippery surface, any sudden change in speed or direction could cause a skid. Accelerate, shift gears, turn, and brake as smoothly as you can when riding on a slippery surface.

There is no single lane position that is always best and no single lane position that should always be avoided. Vary your lane position as road and traffic conditions warrant.

While some people believe that a helmet will limit their vision, this is not the case. Any U.S. Department of Transportation-approved helmet will allow the wearer to see as far as is needed for safe riding.

Ride with extreme caution when approaching an intersection. Cover the clutch and both brakes to reduce your reaction time, if needed.

The mirrors of motorcycles have blind spots, just like those of cars. Always turn your head to check your blind spot before changing lanes.

Use both brakes every time you slow down or stop. If you use only the rear brake when stopping normally, you may not develop the habit or the skill to use the front brake properly when you really need to stop quickly.

When inspecting your motorcycle before a ride, be sure to check the tires, controls, lights, signals, mirrors, brakes, oil, fluids, chassis, and stands.

To make yourself more visible to other road users, it is best if you choose to wear bright orange, red, yellow, or green clothing. Avoid wearing drab or dark colors while riding.

When riding, you should be seated so you can use your arms to steer rather than to hold yourself up. Your elbows should be slightly bent when you hold the handgrips. Keep your knees against the gas tank to help maintain your balance.

Motorcycles have blind spots just like any other vehicle, so you cannot rely on your mirrors to show all of your surroundings. Always turn your head to check your blind spot before changing lanes, merging onto a freeway, or passing.