Over 95% pass rate when practice at DMV Practice Test

Georgia CAR DMV Practice Test 12

Take 12 practice tests for CAR is the best way to prepare for your Georgia DMV exam is by taking our free practice tests. The following question are from real Georgia DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
12
Number of Question
40
Passing score
32
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. This road sign means:
/data/image/dmv_image/car/michigan-bicycle_crossing.png
Bicycle crossing.
Stop only if other cars are approaching.
Yield the right-of-way to pedestrians.

Warning signs are usually yellow with black markings. These signs alert drivers to areas where bicycles may be crossing.

2. You are preparing to exit the interstate. When should you start reducing your speed?
About halfway through the deceleration lane.
As you approach the deceleration lane.
Immediately upon entering the deceleration lane.

When leaving an interstate, you should maintain your speed until you enter the deceleration lane, at which point you should reduce your speed to the exit ramp's posted advisory speed.

3. While in a motor vehicle on a highway, it is:
Illegal to either drink from or possess open containers of alcohol.
Legal to drink alcohol if you're not driving.
Legal to drink alcohol if you're driving but not drunk.

It is illegal to operate a motor vehicle while under the influence of alcohol. Neither drivers nor passengers may possess an open container of alcohol in a motor vehicle while it is in operation.

4. The proper way to make a right turn is to:
Signal, slow down, and get into the lane closest to the centerline before turning.
Signal, slow down, and get into the lane closest to the right curb before turning.
Approach the corner in the lane nearest the right curb, but move over toward the middle of the street before turning.

Before beginning a right turn, use the appropriate signal to give surrounding drivers adequate notice of your intentions. Slow down and approach the intersection from the right lane, staying as close as is practical to the right curb or edge of the roadway.

5. As you enter into a roundabout, you should slow down and:
Yield to any crossing pedestrians and bicyclists.
Yield to any car already within the roundabout.
Both of the above.

When entering a roundabout, you must yield to pedestrians, bicyclists, and traffic already in the roundabout.

6. It is more dangerous to drive at night than during the day because:
You cannot see as far ahead at night.
The road is always more slippery at night.
Your reaction time is slower at night.

With decreased visibility and the glare of oncoming headlights, you cannot see as far ahead at night as you can during the day. Always use headlights and exercise caution when driving in the dark.

7. This road sign means:
/data/image/dmv_image/car/georgia-reduction_of_lanes.png
Road widens ahead.
Lane reduction. The right lane ends soon and traffic should merge left.
Highway entrance ramp ahead.

A warning sign is usually yellow with black markings. This sign warns that the number of lanes ahead is reduced and that traffic will need to merge to the left.

8. "No zones" are areas around trucks where cars:
Disappear into blind spots or are so close that they restrict the truck driver's ability to stop and maneuver safely.
Have sufficient space to travel behind the truck.
Have several car lengths between their vehicle and the truck.

"No zones" are areas around trucks or buses in which cars disappear into the larger vehicle's blind spots. "No zones" can also be defined as areas in which cars are so close to the larger vehicle that they restrict the truck or bus driver’s ability to stop and maneuver safely. A car being in a "No zone" greatly increases the potential for a crash.

9. If you are getting tired while driving, you should:
Stop and either get rest or change drivers.
Drink something with caffeine.
Open a window.

To avoid the dangers of fatigued driving, take breaks every hour or so during a long trip. If possible, share driving responsibilities with another person so you can each sleep while the other person drives.

10. This sign means:
/data/image/dmv_image/car/illinois-merging_lanes.png
Merge.
Winding road ahead.
Reserved parking for persons with disabilities.

This sign warns that two lanes of traffic going the same direction will soon merge into one lane.

11. This yellow sign means:
/data/image/dmv_image/car/california-merging_traffic.png
One lane ahead.
Merging traffic ahead.
Lane ends ahead.

This sign warns of the possible presence of merging traffic.

12. If you have to stop on the shoulder of a freeway because of an emergency, you should:
Raise the hood of your car to indicate trouble and wait in your car for help.
Stand behind your car to warn traffic that you have stopped.
Get out of your car and walk for help.

Stopping on the roadway shoulder is highly dangerous and permitted only in an emergency. If it is necessary to stop, raise the hood of your vehicle and activate your hazard lights to indicate difficulty. Don’t walk along the expressway in search of help.

13. This sign means:
/data/image/dmv_image/car/tennessee-yield_ahead.png
Yield sign ahead.
Side road entering from left.
Stop sign ahead.

This sign indicates that there is a yield sign ahead. You should begin to slow down when you see this warning sign.

14. This sign is a warning that you are approaching:
/data/image/dmv_image/car/florida-railroad_crossing.png
An intersection.
A crosswalk.
A railroad crossing.

A round sign means you are approaching a railroad crossing. This sign is posted a few hundred feet in front of the tracks and tells drivers to slow down, look, listen, and prepare to stop.

15. This yellow signs means:
/data/image/dmv_image/car/california-slippery_when_wet.png
The road ahead has many curves.
There is a sharp curve in the road ahead.
The road ahead may be slippery.

This sign indicates that the road ahead may be slippery when wet.

16. When double solid yellow lines separate lanes of traffic:
Passing is permitted from the left.
Passing is permitted from the right.
Passing is not permitted from either direction.

Yellow lines separating lanes of traffic indicate that traffic is moving in opposite directions. Double solid lines indicate that passing is not permitted from either direction.

17. A broken yellow centerline indicates that:
Passing is not permitted.
Passing on the right is permitted when the way ahead is clear.
Passing on the left is permitted when the way ahead is clear.

A broken yellow centerline next to your side of the road indicates that traffic may cross the centerline to pass from your side of the road.

18. What does this road sign mean?
/data/image/dmv_image/car/georgia-hill.png
Falling rocks
Trucks use second gear
Steep hill

Warning signs are usually yellow with black markings. This sign indicates that you are approaching a steep hill. Slow down and be ready to shift to a lower gear to control your speed and protect your brakes from damage.

19. This sign means:
/data/image/dmv_image/car/georgia-slippery_when_wet.png
Do not drink and drive.
Slippery when wet.
Road curves ahead.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns that the roadway is slippery when wet.

20. This symbol is used for:
/data/image/dmv_image/car/iowa-slow_moving_vehicle.png
Dangerous intersections.
Slow-moving vehicles.
Yield signs.

A reflective orange triangle on the rear of a vehicle means it travels only at slow speeds. You may see this sign on roadwork equipment, farm vehicles, or horse-drawn wagons and carriages. It appears as a solid orange triangle during the day and a hollow red triangle at night.

21. What does this road sign mean?
/data/image/dmv_image/car/georgia-slippery_when_wet.png
Winding road
Loose gravel
Slippery when wet

This sign indicates that the road may be slippery when wet. Exercise caution when driving on a slippery road.

22. When changing lanes:
Rely on the rearview mirror.
Look over your shoulder in the direction you plan to move.
Rely on the left side mirror.

When changing lanes, glance over your shoulder to check for traffic in your blind spot. You may need to look several times before changing lanes. You must keep track of what traffic is doing in front of you as well as what traffic is doing in the lane next to you.

23. Which of the following is a dangerous habit when driving in work zones?
Tailgating another vehicle
Failing to carefully watch for workers and moving equipment
Both of the above

When driving in a work zone, adjust your speed for the traffic conditions and don't follow other vehicles too closely. Be attentive to workers and machines in the work zone.

24. This sign means:
/data/image/dmv_image/car/illinois-side_road.png
Side road.
Merge.
Yield the right-of-way.

This sign indicates that there is an intersection with a side road ahead.

25. This road sign means:
/data/image/dmv_image/car/georgia-merge.png
Cars in the right lane must slow down.
No left turn.
Merge.

Warning signs are usually yellow with black markings. This sign indicates that there could be traffic merging from the right, so drivers should prepare to allow traffic to safely merge.

26. What does this road sign mean?
/data/image/dmv_image/car/georgia-no_right_turn.png
You must turn right.
No right turns permitted.
Right turns permitted on a red light.

This sign prohibits right turns. It is illegal to turn right at an intersection where this sign is posted.

27. When you see this sign, you:
/data/image/dmv_image/car/california-railroad_crossing.png
Are approaching a railroad crossing and should prepare to stop.
Will always stop at the upcoming railroad crossing.
Should stop and wait for a signal before crossing the railroad tracks.

This sign indicates that you are approaching a railroad crossing. You must look, listen, slow down, and prepare to stop. Wait for any trains to pass before you proceed.

28. This sign means:
/data/image/dmv_image/car/illinois-signal_ahead.png
Traffic signal ahead.
Stop.
Yield the right-of-way.

This sign warns of of an approaching traffic signal.

29. A U-turn is not permitted:
In a parking lot.
On or near any curve or hill.
On a straight roadway with a clear view for 500 feet in both directions.

You must never turn around while on or near any curve or hill. You may not be able to see oncoming traffic or pedestrians and may cause a collision.

30. When parking your vehicle on any hill:
One of your rear wheels should touch the curb.
Use your parking brake and leave the vehicle in "park."
Your front wheels should be parallel to the road, if there is no curb.

When parking on a hill, you should always leave your vehicle in gear or in the "park" position. If there is no curb, you should turn your front wheels so that the vehicle will roll away from the center of the road if the brakes fail. If there is a curb, the front wheels should be turned toward it (if headed downhill) or away from and gently touching it (if headed uphill).

31. When changing lanes, you can check your blind spot by:
Using the inside rearview mirror.
Turning your head and looking over your shoulder.
Using your side mirror.

Even if your vehicle is properly equipped with mirrors, there are blind spots that cannot be seen by using the mirrors. Before changing lanes, look over your shoulder to check these areas.

32. When turning left from a two-way street onto a one-way street, you should:
Turn into any lane.
Turn into first lane.
Turn into second lane.

When making any turn, turn from the lane closest to the direction you wish to travel into the first available legal lane. On a turn from a two-way to a one-way street, this means you should turn into the first lane.

33. Make room for cars that are entering the freeway by:
Slowing down.
Merging into a different lane.
Maintaining your speed and position.

Make room for vehicles that are entering a freeway. If possible, merge into the next lane to create a gap for the incoming vehicles. If you cannot merge, adjust your speed to allow for the vehicles to enter traffic as smoothly and safely as possible.

34. When you see this black and yellow sign, it means:
/data/image/dmv_image/car/alaska-sharp_turn_to_right.png
The road to the right is for one-way traffic only.
There is a detour to the right due to road construction.
The road ahead changes direction at an extreme angle.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign tells drivers to slow down and prepare for an abrupt change in direction at an extreme angle.

35. If you encounter an aggressive driver, you should:
Challenge them.
Get out of their way.
Speed up.

Drivers must respect and cooperate with all other road users and conform to specific rules in order to maintain order and to avoid crashes. When encountering an aggressive driver, it is safest to just get out of their way. Always avoid competing with other drivers.

36. This sign tells a driver that:
/data/image/dmv_image/car/connecticut-flagger.png
A construction flagger is ahead.
A police officer is ahead.
A parking attendant is ahead.

This sign warns that there is a flag person ahead. Always follow directions given by a flagger. Flaggers normally wear orange or yellow vests, yellow-green shirts, or bright jackets. They use paddles and red flags to direct traffic through the work zone and to let workers or construction vehicles cross the road.

37. Which of these statements is true about roadwork zones?
Fines are the same for violations committed in work zones as they are under normal traffic conditions.
You must "Slow for the Cone Zone."
Slow down only if you think workers are present.

Reduce your speed and be prepared to slow down or stop for highway equipment. Driving carefully through work zones improves safety for drivers, pedestrians, bicyclists, and road workers.

38. If you are being passed in a no passing zone, you should:
Pull off the road.
Maintain your speed and position.
Slow down and let the other driver safely return to the drive lane.

Passing areas are based on how far ahead drivers can see. Allow the passing vehicle to re-enter the drive lane as easily as possible to help everyone avoid potential upcoming hazards.

39. What does this road sign mean?
/data/image/dmv_image/car/georgia-stop.png
Slow down and prepare to stop if cars are approaching you.
Come to a full stop then proceed when it is safe to do so.
Proceed carefully through the intersection, not always stopping.

An octagonal sign always means stop. When approaching a stop sign, you must come to a complete stop at the marked stop line and proceed only when it is safe to do so. If there is no stop line, stop before the crosswalk. If there is no crosswalk, stop before the intersection at a point from which you can see any oncoming traffic.

40. If bad weather makes it difficult for you to see clearly, you should:
Speed up to get off the road quickly.
Drive in the lane closest to oncoming traffic.
Increase your following distance.

When it is difficult to see due to darkness or poor weather, increase your following distance. This will give you more time to react to hazards that you may not see in advance.

Your Progress
  • 0Incorrect (8 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40