District Of Columbia MOTORCYCLE DMV Practice Test 14

It is safest to wear long pants and a jacket to fully cover your arms and legs while riding. Clothing made of leather can provide the highest level of protection.

To reduce the risk of fatigue on a long trip, dress to protect yourself from tiring elements, such as wind, cold, and rain. Limit yourself to no more than six hours of riding per day and take rest brakes at least every two hours. Avoid using artificial stimulants, as these only result in extreme fatigue when they wear off.

Motorcycles often seem to attract dogs. If you are being chased by a dog, downshift and approach it slowly. Then, as you approach the dog, accelerate and leave it behind.

Goggles can provide protection for your eyes, but only a face shield can protect your entire face. Eyeglasses are not an adequate substitute for either goggles or a face shield.

A plastic, shatter-resistant face shield provides protection for your entire face in the event of a crash. Goggles will protect your eyes, but not the rest of your face. A windshield or eyeglasses are not a substitute for either goggles or a face shield.

Frequent mirror checks should be part of your normal searching routine. Additionally, make a special point of using your mirrors before changing lanes, when stopping at an intersection, and before slowing down.

For people age 21 and above, a blood alcohol concentration (BAC) of 0.08 percent or higher is considered legally intoxicated. It is both illegal and dangerous to operate a motor vehicle while legally intoxicated.

To turn, a motorcycle must lean. To make the motorcycle lean, press on the handgrip in the direction of the turn.

Instead of mechanical turn signals, operators may use hand signals to indicate turns or stops. If an operator's left arm is bent at the elbow and pointing upward, it means the operator plans to turn right or change lanes to the right.

Appropriate clothing can reduce the risk of injury in a crash. Choose a jacket and pants that cover your arms and legs, are made of sturdy material, and are snug enough that they do not flap in the wind.

The greatest potential for conflict between your motorcycle and other traffic is at intersections. Be extra alert when riding somewhere where another vehicle may cross in front of your path of travel.

When being passed, it is generally best to ride in the center portion of your lane. Being too close to the passing vehicle increases the risk of a collision.

It is a good idea to sound your horn before riding past a vehicle or pedestrian that may move into your lane. If you see a driver in an adjacent lane driving too closely to the vehicle ahead of them, you may assume that they want to pass and may cut in front of you to do so. If you see a person in the driver's seat of a parked car, or if you see a pedestrian or bicyclist in the street, it is a good idea to sound your horn as you pass.

It is a good idea to flash your brake light before slowing if someone is following you too closely. The other driver may be focused on you and be unaware of the upcoming hazard that is causing you to slow down. It is also important to flash your brake light if you are about to slow down in a place where other drivers might not expect you to do so.

When riding over an uneven surface, rising off of your seat will allow your joints to absorb some of the force of impact. This will make it less likely that the impact of the surface will throw you off of the motorcycle.

To safely cross railroad tracks, trolley tracks, or pavement seams running parallel to your lane, move to a lane position that will allow you to cross them at an angle of at least 45 degrees. Then, make a quick, sharp turn. If you try to edge across, the tracks or seam could catch your tires and throw you off balance.

It is best not to shift gears when crossing railroad tracks. There is a chance your motorcycle might stall while you are on the tracks.

Under normal conditions, you should maintain a following distance of at least four seconds. Increase your following distance any time conditions are less than perfect.

You should wear reflective materials when riding at night to make yourself more visible to other road users.

There are several major factors that can affect a person's blood alcohol concentration (BAC). A BAC is determined in part by the amount of alcohol someone has consumed, how fast they consumed the alcohol, and their body weight.

To stop quickly, apply both brakes at the same time.

To make yourself visible to other road users, you should wear brightly-colored clothing with reflective materials, use your headlight at all times, and use your signals and brake light properly.

To discourage automobile drivers from trying to share your lane, ride in the center portion of the lane.

In the state of Kentucky, a person with a minimum blood alcohol concentration (BAC) of 0.08 percent is considered legally intoxicated. It is both illegal and dangerous to operate a motor vehicle while under the influence of alcohol.

Check your brake levers individually before every ride. Make sure each one feels firm and holds the motorcycle when the brake is fully applied.