District Of Columbia MOTORCYCLE DMV Practice Test 11

Rounded, or convex, mirrors provide a wider view of the road than flat mirrors, but they also make objects seem farther away than they actually are.

The center of a lane can be especially hazardous when wet. When it begins to rain, avoid the center of the road by riding in the tire tracks left by cars. The left tire track is often the best option.

When following a car, you should ride in a position that allows the driver to see you in their rearview mirror. Usually, that means riding in the center portion of the lane. Because most drivers check their rearview mirrors much more often than they check their side mirrors, being in this lane position increases the chance that they will see you.

Any U.S. Department of Transportation-compliant helmet is required to have an impact-resistant outer shell, an impact-absorbing inner liner, a comfort liner, and a chinstrap retention system.

If you need to stop quickly, you should apply both brakes at the same time.

A number of surfaces can provide poor traction for tires. Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; and painted lane markings can be more hazardous for a motorcyclist than dry pavement.

Motorcyclists will seldom hear their tire go flat. Tire failure is more commonly indicated by a sudden change in handling.

An expanded cushion of space is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up to a larger following distance.

Under normal conditions, the stopping distances for motorcycles is nearly the same as it is for cars. However, slippery pavement makes quick stops especially difficult for motorcycle operators.

Because it is more difficult to see and judge distances in the dark than in daylight, you should maintain an expanded following distance of at least three seconds when riding at night. It may take you longer than usual to realize the vehicle in front of you has stopped and you may need additional time to slow or stop to avoid hitting the vehicle.

Choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and be free of obvious defects.

A pre-ride inspection should include checks of the tires, oil and fluids, lights, signals, clutch, throttle, mirrors, brakes, and horn. Conduct a thorough pre-ride inspection before every ride.

Because of the extra weight placed on a motorcycle by a passenger, you may need to adjust the motorcycle's shocks before carrying a passenger. Because the motorcycle will sit at a different angle, you should also adjust the headlight and mirrors to compensate for the additional weight.

When riding behind a car, you should position yourself so you can be seen in the other driver's rearview mirror. Riding in the center portion of the lane will generally ensure that you will appear in the middle of their rearview mirror, where the driver is most likely to notice you.

Be sure to wear gear that can help you and your motorcycle to be spotted by other road users. Bright, reflective clothing can make it easier for others to see you.

For your safety, it is important to be aware of what's behind you. Frequent mirror checks should be a part of your normal searching routine.

When taking normal turns, lean at the same angle as your motorcycle. However, in slow, tight turns, you should counterbalance the leaning motorcycle by keeping your body upright.

Riding directly next to another vehicle is dangerous because you could be riding in the vehicle's blind spot. Additionally, the vehicle may block your route of escape if another hazard arises. If you find yourself riding directly alongside another vehicle, either speed up or drop back.

When being passed, it is best to ride in the center portion of your lane. Riding on the side nearest to the passing vehicle increases the risk of a collision. Riding on the side farthest from the passing vehicle is also dangerous because it may tempt them to merge back into your lane too soon. Stay in the center portion of the lane when being passed.

If your drive chain or belt fails, you will experience an immediate loss of power to the rear wheel.

Before beginning a ride, you should ask your passenger to mount the motorcycle only after the engine has been started. They should sit as far forward as they can without crowding you and hold onto the motorcycle's passenger handholds or onto your waist, hips, or belt. They should keep their legs away from the muffler, chains, and other moving parts.

The best way to deal with a tailgater is to get them in front of you. If you can do so safely, change lanes and let them pass. Increasing your speed may only encourage the driver to tailgate you at a higher speed.

Engine braking by smoothly downshifting can be a useful option for motorcyclists. If you choose to engine brake, apply your brake lights separately to let other drivers know that you are slowing down.

Most wobbles can be traced to improper loading, unsuitable accessories, or incorrect tire pressure. Do not try to accelerate out of a wobble.

When passing another vehicle on the left, you should ride in the left portion of your lane. Signal your intentions and check for traffic. Pass when it is safe to do so, then signal and return to your original lane when traffic allows.