Delaware MOTORCYCLE DMV Practice Test 9

It can be difficult to judge the speed and distance of a small vehicle, such as a motorcycle. Do not assume that drivers of larger vehicles will be able to accurately understand your speed and location.

In general, it is best for a group to ride in a staggered formation. Move into a single-file formation when taking a curve, making a turn, entering a highway, or leaving a highway.

Proper face/eye protection is required by law in the state of California. A face shield can protect your whole face in the event of a collision. An effective eye or face shield must allow the rider a clear view to either side.

Warning signs are yellow with black lettering or symbols and provide important information to motorists about upcoming road conditions. This sign warns that the roadway ahead is likely to be slippery when wet.

This sign is displayed on the rear of slow-moving vehicles that may be moving more slowly than 25 mph, such as construction equipment, farm machinery, or horse-drawn vehicles.

When taking a turn, you should look through the turn to where you want to go. Turn just your head, not your shoulders, and keep your eyes level with the horizon.

Perform safety checks before every motorcycle ride. Test your brake controls individually to make sure each one activates the brake lights.

The best way to handle a tailgater is to allow them to pass you. Speeding up may result in them continuing to tailgate you, just at a higher speed.

When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.

Exposure to engine and wind noise can damage your hearing, even if you are wearing a helmet. Wearing hearing protection while riding is always a good idea.

A head or neck injury is always a risk when riding a motorcycle, regardless of your speed of travel. With few exceptions, the risk of head and neck injuries is greatly reduced by properly wearing a quality helmet.

Regulatory signs are white signs with red and black markings that inform drivers of specific traffic laws in the indicated area. This sign indicates that right turns are prohibited.

When making a normal, non-emergency stop, use the front and rear brakes simultaneously and downshift.

To shift up to a higher gear, position your foot under the shift lever and lift.

Experienced riders use a SEE strategy while riding to make safe judgements. "SEE" stands for Search, Evaluate, and Execute.

A plastic, shatter-resistant face shield can protect your face in the event of a crash. It also provides protection against more routine hazards, such as pebbles thrown up from other vehicles, wind, dust, dirt, rain, and insects.

A motorcycle's horn is not as loud as the horns of other vehicles. Motorcyclists should use their horns where appropriate but should not rely on their horns to keep them safe.

Grabbing at the front brake or jamming down on the rear brake can cause the brakes to lock. This may result in control problems.

In a normal turn, the rider and the motorcycle should lean together at the same angle. In a slow, tight turn, the motorcycle should lean while the rider counterbalances by keeping their body upright.

Like any vehicle, motorcycles have blind spots. In addition to using your mirrors, you must always turn your head to check your blind spot before changing lanes.

The only way to sober up after drinking is to give your body the time it needs to remove the alcohol. There are no techniques that will speed up this process.

Wear brightly-colored clothing to maximize your visibility when riding, even during the daytime. Clothing made with reflective materials can also be helpful.

Wearing brightly-colored or reflective clothing can increase your chances of being seen by other road users.

Motorcycle riders should use their brake lights to communicate with other road users. It is particularly important for a motorcyclist to flash their brake light before slowing down to make a tight, fast turn off of a high-speed roadway. Motorcyclists should flash their brake lights when slowing in any location where other drivers may not expect them to slow down.

All curves are different. When taking a curve, choose a lane position that is appropriate for conditions and adjust as needed.