Delaware MOTORCYCLE DMV Practice Test 6

Before setting out on a ride, you should make sure that your motorcycle's fuel supply valve is open. If the fuel valve is closed, the engine may still start with the fuel that is remaining in the lines from a previous ride, but it will stall once the lines are empty.

A primary cause of single-vehicle collisions is motorcyclists running too wide in a curve or turn. Taking a turn too wide can cause a motorcycle to leave the roadway or collide with an object.

All passes must be completed within the posted speed limits and only in areas where passing is permitted.

Most collisions between motorcycles and automobiles take place at intersections. The most common cause of these accidents is the automobile operator failing to properly yield the right-of-way to the motorcyclist.

Experienced riders use a SEE strategy while riding to make safe judgements. "SEE" stands for Search, Evaluate, and Execute.

To reduce the risk of a collision, be sure to make yourself visible, clearly communicate your intentions, maintain an adequate space cushion, search your path of travel, and identify and separate hazards. Always be prepared to react to any hazard that could arise.

Wearing brightly-colored or reflective clothing can increase your chances of being seen by other road users.

The best way to handle tailgaters is usually to change lanes and let them pass. Speeding up may only increase the danger by prompting them to continue tailgating you at the higher speed.

Riding directly alongside another vehicle is dangerous because you may be in the vehicle's blind spot and the driver will not know you are there. Additionally, the vehicle may block your route of escape if any hazards should arise.

The front brake provides about three-quarters of a motorcycle's total stopping power. Use both the front and rear brakes every time you stop.

All passes must be completed within legal speed limits. Riders should pass only where it is safe and legal to do so.

Oil drippings and debris from cars and trucks often collect in the center portion of a lane.

The two main types of helmets are full-face and three-quarter. A full-face helmet can provide the best protection in the event of a crash.

When turning, you should always lean in the direction of the turn. Slow down before entering the turn.

It is important to consistently check vehicles approaching your motorcycle from behind to determine if drivers are paying attention to you and your movements. Use your mirrors when stopping at an intersection to make sure approaching drivers are responding appropriately to your actions.

In general, a staggered formation is the best way for a group of riders to maintain close ranks while allowing adequate space cushions for each rider. A single-file formation is best when taking curves, turning, entering a highway, or exiting a highway.

A “wobble” is when the front wheel and handlebars suddenly start to shake from side to side. Most wobbles are a result of improper loading, unsuitable accessories, or incorrect tire pressure.

In general, the best way for a group of motorcyclists to maintain close ranks while still allowing each rider an adequate space cushion is to ride in a staggered formation.

When taking a turn, you should look through the turn to where you want to go. Turn just your head, not your shoulders, and keep your eyes level with the horizon.

To reduce the risk of being involved in a collision, consistently scan your path of travel at least 10 to 15 seconds ahead of your motorcycle. Scanning the road ahead will give you time to react to a hazard before meeting the hazard.

The front brake of a motorcycle is more powerful than the rear brake. It can provide three-quarters of the bike's total stopping power.

If the front wheel locks up while you are braking, release the pressure from the front brake. Immediately re-apply pressure to the brake with controlled gradual pressure.

A motorcycle that is carrying a passenger will handle differently than usual due to the added weight of the additional rider. An operator should ride at slower speeds and allow more time and distance to slow down and stop. A passenger should hold firmly and securely onto the motorcycle's passenger handgrips or onto the operator's waist, hips, or midsection.

Avoid riding on oil and grease buildup. Because the oily strip in the center of a lane is usually no more than two feet wide, it is often possible to stay to the left or right side of the oil and still be in the center portion of the lane.

When approaching a railroad crossing that is controlled by a sign with flashing lights, you must come to a complete stop and wait until the train has passed and the lights have stopped flashing before proceeding. Never try to outdrive a train.