Delaware MOTORCYCLE DMV Practice Test 14
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Delaware DMV exam is by taking our free practice tests. The following question are from real Delaware DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
While the center strip of the road can be oily, it usually provides enough traction for safe riding, unless it is raining. The oily strip is usually no more than two feet wide, so motorcyclists can generally ride on either side of the strip and still be in the center portion of the lane.
Any time a motorcycle is leaning, such as in a turn or curve, there is less traction available for braking. Both brakes may still be used while a motorcycle is turning, but it must be done with great care.
For riding, choose footwear that is sturdy and high enough to cover and support your ankles. Soles should be made of hard, durable, slip-resistant material.
Use both brakes every time you slow or stop. It is important to be able to brake quickly by using both brakes.
To avoid becoming fatigued when riding your motorcycle on a long trip, limit how much time is spent riding each day and take frequent rest breaks. Avoid the use of artificial stimulants because you may experience extreme fatigue when they start to wear off.
When approaching a blind intersection, move into the lane position that makes you the most visible to surrounding drivers.
In high-risk areas, such as intersections, shopping areas, schools, or construction zones, a motorcyclist should reduce their speed. They should cover the clutch and both brake levers to reduce their reaction time in the case of an emergency.
On a slippery surface, you should reduce your speed, avoid making sudden moves, and brake by using both brakes.
It is best to change gears before entering a turn. If you must change gears while in a turn, be sure to do so smoothly.
When being passed, it is generally safest to ride in the center portion of your lane. Riding on the side nearest the passing driver increases the danger of colliding with them, and riding on the side farthest from the driver may tempt them to return to your lane too soon.
As with any other vehicle, the mirrors of a motorcycle have blind spots. Always turn your head to check for traffic in your blind spot before changing lanes.
If you are following a car, the driver is most likely to notice you if you position yourself behind them in the center of your lane. This lane position places you in the driver's rearview mirror. Most drivers check their rearview mirrors much more often than their side mirrors.
There is no single lane position that is always best and no single lane position that should always be avoided. Adjust your lane position as circumstances warrant.
Leather boots provide the best degree of protection when riding. They should be high and sturdy enough to cover and support your ankles.
While the center strip of the road can be oily, it usually provides enough traction for safe riding, unless it is raining. The oily strip is usually no more than two feet wide, so motorcyclists can generally ride on either side of the strip and still be in the center portion of the lane.
A helmet will provide a rider with the best protection if it meets U.S. Department of Transportation (DOT) standards; fits snugly all the way around; and has no obvious defects, such as cracks, loose padding, or frayed straps.
Motorcycles often seem to attract dogs. If you are being chased by a dog, downshift and approach it slowly. Then, as you approach the dog, accelerate and leave it behind.
Traction may be poor on surfaces such as wet, snowy, icy, or muddy pavement; gravel roads; lane markings; and steel plates and utility hole covers.
The greatest potential for conflict between motorcycles and other traffic is at intersections. Oncoming cars turning left in front of motorcyclists is the biggest danger.
On a slippery surface, any sudden change in speed or direction could cause a skid. Accelerate, shift gears, turn, and brake as smoothly as you can when riding on a slippery surface.
The main factors that determine a person's blood alcohol content (BAC) are the person's body weight, how much alcohol is consumed, and how quickly the alcohol was consumed. It is always safest to not ride after consuming alcohol in any amount.
It is important for motorcyclists to avoid lingering in the blind spots of any vehicle, especially in those of large trucks. Remember that if you can't see the truck's mirrors, the driver can't see you.
The front brake of a motorcycle is more powerful that the rear brake and can provide at least 70 percent of the bike's total stopping power.
Always allow merging cars plenty of space and never assume that the drivers see you. Change lanes away from the entering traffic, if possible. If there is no room for a lane change, adjust your speed to allow for safe merging.
A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.
- 0Incorrect (5 allowed to pass)
- 0Correct