Delaware CDL DMV Endorsement Tank 1

Before a trip, you should ensure that air reaches all air brakes on all trailers by opening up the rear emergency line and service line shut-off valves to listen for escaping air. Close both shut-off valves before beginning to drive.

The shipper of hazardous materials is responsible for identifying the product's identification number; proper shipping name; hazard class; packing group; and correct packaging, labels, marking, and placards.

During an inspection, ensure that the wheel bearing/seals are not leaking.

Rust around wheel nuts may mean that they are loose. Check the tightness of the nuts if you see any rust in the area.

Radioactive materials are categorized as Class 7 hazardous materials.

If you are not sure which kind of extinguisher should be used on a fire in your vehicle, particularly a hazardous materials fire, you should wait for the firefighters to arrive and allow them to extinguish it.

If your CMV gets stuck on railroad tracks, you should immediately leave the vehicle and get away from the tracks. Check the signposts or signal housing at the crossing for emergency contact information and call 911, or another appropriate emergency number.

Good drivers look down the road at least 12 to 15 seconds ahead of their vehicles. This makes it possible to identify hazards early, when drivers are more likely to have time to respond appropriately.

The stab braking method for emergency stops involves fully applying the brakes until they lock up. The brakes are then released until the wheels start rolling, and then the process is repeated.

When turning on your vehicle's engine, the lights on the dash should come on and then turn off. If the ABS malfunction light stays on, the system is not working properly. In the case of a truck with a trailer, if the yellow light on the left rear of the trailer stays on once the engine has been started, the system is not working properly.

Backing a large CMV is always dangerous because you will not be able to see everything behind you. If you must back up, use a helper, if possible.

To avoid becoming an aggressive driver, begin a trip with realistic expectations of how long the trip will take, allowing extra time for traffic delays. Do not tailgate other vehicles. To avoid upsetting other drivers, do not drive slowly in the left lane and do not gesture at the drivers (even in seemingly minor ways, like shaking your head).

When driving through work zones, you should make a particular point of reducing your speed when workers are on or near the road.

All trailers and converter dollies manufactured on or after March 1, 1998 must be equipped with Anti-Lock Braking Systems (ABS).

The use of cargo heaters is not always permitted. When transporting materials that are categorized as Class 1 (Explosives), Class 2.1 (Flammable Gas), or Class 3 (Flammable Liquids) materials, heaters are generally prohibited.

While the manual includes all of the information required to pass the hazardous materials knowledge test, you should consider reading the manual as only the first step to learning about the topic. You can learn more by reading and understanding the federal and state rules about the transportation of hazardous materials, as well as by attending hazardous materials training courses.

The body removes alcohol at a fixed rate. The more alcohol consumed, the longer it will take for the body to remove the alcohol from its system.

If an emergency vehicle with its lights on is stopped on the side of the road, move over laws require drivers to vacate the lane directly next to the vehicle, if possible. If a driver cannot move over safely, they must slow down and proceed with caution.

If an ABS system fails, the vehicle will still have normal braking function. The driver should continue to drive and brake as they normally would.

When driving at night, it is important that your lights be clean so that they provide as much light as possible. This will help others to see your vehicle.