Delaware CAR DMV Practice Test 22

Excessive speed is one of the most common contributing factors to vehicle crashes. Excessive speed does not save time and often leads to high-risk decision-making.

When broken yellow lines separate the lanes of traffic on a two-lane roadway, any driver may pass when there is no oncoming traffic.

Warning signs provide notice to road users of a situation that might not be readily apparent and are usually yellow with black markings. This warning sign tells drivers to be alert to an intersecting side road ahead.

Children are often the least predictable pedestrians and the most difficult pedestrians to see. Take extra care to look out for children, especially near schools, bus stops, playgrounds, parks, and ice cream trucks. Be aware of children riding bikes on the sidewalk, as they may come onto the road unexpectedly.

A round sign means you are approaching a railroad crossing. This sign is posted a few hundred feet in front of the tracks and tells drivers to slow down, look, listen, and prepare to stop.

Before changing lanes, you should check your side mirrors and look over your shoulder to make sure it is safe to proceed.

Use your low beams when driving in fog, snow, rain, or mist. Light from high beams will reflect off of precipitation, causing a glare and making it even more difficult to see. Some vehicles are equipped with fog lights that should be used in addition to low beam headlights.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns that you are leaving a separated one-way highway and will soon be driving on a two-way highway.

You should enter a freeway at or near the speed of traffic, unless the speed of traffic exceeds the legal speed limit.

This sign warns of a winding road ahead.

A flashing yellow traffic light means drivers must slow down, be more aware, and proceed with caution. Be alert to crossing traffic and pedestrians.

This sign prohibits right turns. You cannot make a right turn at an intersection where this sign is posted.

A triangular red and white sign indicates that you must yield the right-of-way.

Backing up is always dangerous because it is hard to see behind your vehicle. Use extra caution when backing up.

A downward-facing triangular sign is always a yield sign. Drivers must be prepared to slow down or stop when approaching a yield sign.

When changing lanes, glance over your shoulder to check for traffic in your blind spot. You may need to look several times before changing lanes. You must keep track of what traffic is doing in front of you as well as what traffic is doing in the lane next to you.

Warning signs alert drivers to upcoming hazards and are usually yellow with black markings. This sign warns drivers about potential traffic merging into their lane from the right.

Bicycles are considered vehicles when used on roadways. Bicyclists and motorists are expected to follow the same rules of the road.

Anytime you want to merge with other drivers, you need to find a gap large enough for you to safely enter into the flow of traffic. You should not stop on the entrance ramp to an interstate highway unless there are no gaps into which you may safely merge.

When making a left turn, you should always begin signaling about 100 feet before the turn. You should keep your front wheels aiming straight ahead until it is safe to start your turn. This ensures that you will not be pushed into oncoming traffic if another vehicle hits you from behind.

Always be aware of pedestrians near your vehicle. You must do everything you can to prevent striking a pedestrian, regardless of the circumstances.

When driving, watch for warning signs of fatigue. You are too tired to drive safely if you are struggling to keep your eyes open, drifting from your lane, or turning up the radio and rolling down your windows to keep yourself awake. If you notice these signs, it is a good idea to find a safe place to park so you can refresh yourself with a short nap.

Use your right foot for both braking and accelerating. You should apply the brakes gently with increasing pressure so that your vehicle stops gradually and smoothly.

When driving at night, use your high beam headlights if you are not closely following another vehicle and there are no oncoming vehicles. High beams allow you to see twice as far as low beams. It is important to use high beams on unfamiliar roads, in construction areas, or where there may be people along the side of the road.

This sign means drivers cannot make a left turn. It is unsafe and unlawful to make a left turn at an intersection where this sign is posted.

A white rectangular sign indicates that you must obey the stated rule. This sign means that drivers should not pass other vehicles for any reason.

When traffic control signals are not working, a driver must always treat the intersection as an all-way stop and come to a complete stop, unless otherwise directed by law enforcement. The driver must then look and yield the right-of-way before entering the intersection.

The flashing overhead lights and stop arm on a school bus will be activated when the bus is stopped to load or unload students. If approaching a bus using these signals, you may not proceed until the red lights have stopped flashing and the stop arm has been retracted. Never pass a school bus that is dropping off or picking up students.

Before returning to your original lane after passing, you must make sure you are not dangerously close to the vehicle you have just passed. When you can see both of the vehicle's headlights in your rearview mirror, you may have enough room to return to the lane.

By definition, blind spots are areas that cannot be seen using your mirrors. To check your blind spots, you should look over your shoulders.