Connecticut MOTORCYCLE DMV Practice Test 6
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Connecticut DMV exam is by taking our free practice tests. The following question are from real Connecticut DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; painted lane markings; and metal covers and plates in the road can be slippery surfaces. Motorcyclists should ride with extra caution when riding over slippery surfaces.
An integrated braking system is a variant of a linked braking system. Partial front braking is applied whenever the rear brake is activated. Check your owner's manual for a detailed explanation of the braking system on your motorcycle.
On average, the body can eliminate the alcohol content of about one drink per hour. However, some alcohol may accumulate in the body even if a person consumes only one drink per hour. Their abilities and judgment can still be impaired.
You should not carry a passenger unless your motorcycle has a seat that is large enough for two riders. The motorcycle should be equipped with footrests for the passenger. Your passenger should wear the same kind of protective gear that is recommended to operators.
Motorcycles generally have one brake for each wheel. The front brake carries more braking power than the rear brake.
A number of surfaces can provide poor traction for tires. Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; and painted lane markings can be more hazardous for a motorcyclist than dry pavement.
To ride safely at night, you should reduce your speed, use your high beam headlight when you are not riding near other vehicles, and increase your following distance. Take advantage of vehicles ahead of you to provide clues about the upcoming road. Their headlights may help to illuminate the road ahead and their taillights will bounce up and down if the vehicle is being driven over bumps on the road.
When riding, sit so that you can use your arms to control the motorcycle rather than to hold yourself up. Your arms should be slightly bent when you hold the handgrips. To help maintain your balance, keep your knees against the gas tank and your feet firmly on the footrests.
A small mechanical fault can have more serious consequences on a motorcycle than on a car. Conduct a thorough pre-ride inspection of your motorcycle before every ride.
When being passed, it is generally safest to ride in the center portion of your lane. Riding on the side nearest the passing vehicle increases the risk of colliding with them. Riding on the side farthest from the passing vehicle is also dangerous, as it could tempt the driver to re-enter your lane before it is safe to do so.
To discourage automobile drivers from trying to share your lane, ride in the center portion of the lane.
You should wear gear that helps protect you while you ride. It is best to wear a DOT-approved helmet, face or eye protection, and protective clothing.
To help reduce your reaction time, you should cover the clutch and brakes. This is especially helpful when riding through areas where potential hazards are likely.
Shifting to a lower gear produces an effect similar to applying the brakes. This is known as engine braking.
Riding in cold weather for long periods of time can cause severe chill, fatigue, and even hypothermia. Be sure to wear proper clothing to protect you from the elements.
In a group of motorcyclists, riders with less experience should be positioned toward the front of the group, just behind the leader. This will allow more experienced riders to keep an eye on them without forcing the inexperienced rider to lead the group.
- 0Incorrect (3.2 allowed to pass)
- 0Correct