Connecticut CDL DMV Endorsement Double 2

If your trailer begins to skid, you should release the brakes to regain traction. The trailer will begin to straighten out once the wheels begin to grip the road again.

During a pre-trip inspection, you should activate your lights, then get out of the vehicle to look at them.

Doubles and triples need more space than other vehicles, both because they are longer and because their size and weight prevent them from turning or stopping suddenly. When driving a double or triple, always make sure you have enough space before entering traffic, crossing traffic, or changing lanes.

The liver removes alcohol from the body at a fixed rate. Despite popular belief, tricks like drinking coffee or taking a cold shower will not speed up the process. The only way to become sober is to allow your body the time it needs to remove the alcohol from your system.

You must always properly signal before turning or changing lanes.

One way to know when it is time to shift gears is to learn your vehicle's operating rpm range. You should shift up when your engine reaches the top of that range. You can also learn which speeds each gear is good for and shift up based on your speedometer.

To avoid hitting anything behind you, make sure that your vehicle does not roll back when you start from a complete stop.

You may be able to tell that another driver is distracted if you can see them drifting within a lane or across lane dividers; traveling at inconsistent speeds; being preoccupied with a cell phone, a map, food, or other items; or engaging in conversation with passengers.

It is important to observe other drivers' actions and identify clues that a person could be driving impaired. Drivers who have had too much to drink, are sleepy, are on drugs, or are ill can present hazards to other drivers. One sign that a driver may be impaired is that they stop in inappropriate places, such as at green traffic lights.

Commercial drivers are required by federal and state laws to inspect their vehicles before every trip. Regular inspections can help drivers identify issues before they become dangerous and costly.

You should not brake while making a quick turn to avoid a hazard. Doing so could cause your wheels to lock and make your vehicle skid out of control.

The brakes in an air brake system use compressed air to function properly.

The most important reason to inspect your vehicle is to ensure the safety of yourself and other road users.

When inspecting your vehicle's suspension, verify that leaf springs do not have missing or broken leaves. If at least one-fourth of the leaves in a leaf spring are missing, the vehicle will be put out-of-service until the defect is fixed.

If you have an Anti-Lock Braking System (ABS) equipped on only the tractor, only the trailer, or only one axle, you will still have more control over the vehicle when braking than you would without ABS. You should brake normally.

If you double your speed, your braking distance will become four times longer. Similarly, the impact your vehicle would have in the case of a collision will also multiply by four.

Brakes are designed to take a lot of heat, but drivers should not rely solely on the brakes to slow their vehicle. Brakes may fade and lose their ability to slow down the vehicle if they become too hot, so drivers should also rely on the engine braking effect.

If brakes are used too much, they will overheat and become less effective. This is referred to as brake fade.

Rust around wheel nuts can indicate that the nuts are loose. If you find rust near the wheel nuts, check their tightness before beginning to drive.

If you are not certain that your vehicle will fit under overhead objects, you should slow down and take a different route, if possible.