Arkansas MOTORCYCLE DMV Practice Test 4

Experienced riders use a SEE strategy while riding to make safe judgements. "SEE" stands for Search, Evaluate, and Execute.

When riding in a group, it is generally best to travel in a staggered formation. This formation allows riders to remain in close ranks while still maintaining safe following distances.

You will get the maximum protection from your helmet if it meets U.S. Department of Transportation (DOT) and state standards, fits snugly all the way around, and has no obvious defects.

To lessen the chances of a crash occurring, you should make yourself visible, communicate your intentions to others, maintain adequate space cushions, search your path of travel at least 12 seconds ahead, identify and separate hazards, and be prepared to react to changing conditions.

Ask your passenger to wait to mount the motorcycle until after you have started the engine. They should sit as far forward as possible without crowding you and firmly hold onto your waist, hips, or belt.

While some people believe that a helmet will limit their vision, this is not the case. Any U.S. Department of Transportation-approved helmet will allow the wearer to see as far as is needed for safe riding.

Taking a turn too fast may cause a rider to cross into another lane of traffic, or even leave the road entirely. It is important to slow down before entering a turn or curve.

Clothing made of sturdy leather or synthetic materials provide riders the best protection in the case of an accident. Riders should wear long pants and jackets while riding.

If a hazard requires you to brake and swerve, you should take these actions separately. Never brake while swerving because doing so can cause your motorcycle to fall over.

Impairment of riding skills begins with the first drink. If you have consumed alcohol in any amount, it is not safe to ride.

When passing a truck, you should only return to your original lane when you can see the entire front of the truck in your rearview mirror.

A road is often very slippery when rain first begins to fall. When it starts to rain, ride in the tire tracks left by cars to get the best traction.

Keep your head and eyes up when riding through a work zone. Ride slowly over the grooved pavement.

You should never rely on eye contact as an assurance that a driver has seen you. It is not uncommon for a driver to look directly at a motorcyclist and still fail to actually notice them.

When taking a long trip, be sure to schedule in frequent breaks to rest, even if you do not feel tired. Experienced operators seldom try to ride for longer than six hours a day. Wind, cold, and rain can make you tire quickly, so be sure to dress to protect yourself from the elements.

Because it can be difficult to judge distances in the dark, ride with a following distance of at least three seconds when traveling at night.

If you are following a car, the driver is most likely to notice you if you position yourself behind them in the center of your lane. This lane position places you in the driver's rearview mirror. Most drivers check their rearview mirrors much more often than their side mirrors.

If a tire goes flat while you are riding, hold onto the handgrips firmly and concentrate on maintaining a straight course. Brake only if you are sure which tire is flat. Exit the roadway once your motorcycle has slowed considerably.

The best way to help others see your motorcycle is to have your headlight turned on (as well as your running lights, if applicable). Use your high beam headlight both day and night, whenever it is legal and safe to do so.

Convex mirrors are installed on many motorcycles. Compared to flat mirrors, convex mirrors provide a wider view of the road. However, convex mirrors can also make approaching vehicles seem farther away than they actually are.

The key to making an evasive maneuver is to get your motorcycle to quickly lean in the direction you wish to turn. The sharper the turn, the more it must lean.

Most drivers do not look at their side mirrors as often as they look at their rearview mirror. Therefore, when following a car, it is generally most advantageous to ride in the center portion of the lane where you are most likely to be visible in the driver's rearview mirror.

There is no single lane position that is best at all times. Choose the lane position that allows the most visibility and space around you. Change your lane position as traffic situations change.

Loads should be kept over, or in front of, the rear axle. Only experienced riders should carry loads on their motorcycle.

If traffic allows, the center lane position is usually the best position for a motorcyclist to take when following a car because the center position will place them in the driver's rearview mirror. A motorcyclist should always be prepared to change positions if traffic or conditions require it.