Arizona MOTORCYCLE DMV Practice Test 16

Motorcycle headlights are generally smaller and less powerful than those of cars.

While a staggered formation is usually best under normal riding conditions, a group of riders should switch to a single-file formation when taking curves, turning, or entering or exiting a highway.

When riding, wear boots or shoes that are high and sturdy enough to cover and support your ankles. Heels should be short so they don't catch on rough surfaces. Laces should be tucked in so they can't catch onto the moving parts of the motorcycle.

You should avoid riding if you are tired. When making a long trip, take rest breaks at least every two hours to reduce the risk of becoming fatigued.

The single most effective action you can take to improve your chances of surviving a crash is to wear a high-quality helmet that is securely fastened.

The front brake of a motorcycle is more powerful than the rear one, providing at least 70 percent of the total stopping power. Always use both brakes any time you slow or stop.

When being passed, it is generally safest to ride in the center portion of your lane. Riding on the side nearest the passing vehicle increases the risk of colliding with them. Riding on the side farthest from the passing vehicle is also dangerous, as it could tempt the driver to re-enter your lane before it is safe to do so.

In a group, less experienced riders should ride toward the front, just behind the leader, so more experienced riders can easily watch them.

The clothes you wear when riding a motorcycle should protect you from sunburn, windburn, rain, dehydration, cold, and parts of the motorcycle. Your clothing should provide you with additional protection in the case of a crash.

To turn, a motorcycle must lean. To make the motorcycle lean, press on the handgrip in the direction of the turn.

The best way to deal with a tailgater is to get them ahead of you. If you can do so safely, change lanes and let them pass. Speeding up may only increase the danger by encouraging them to continue tailgating you at a higher speed.

Hand signals are an important part of communication when riding in groups. A lead rider raising their left arm and extending their index finger means that the group of riders should move into a single-file formation.

Before riding with a heavy load, you should make sure your tire pressure, spring pre-load, air shocks, and dampers are at the settings recommended for the relevant weight.

If you experience chain slippage, tightening the chain may help. If tightening the chain does not reverse the problem, replace the chain before continuing to ride your motorcycle.

If a tailgater is following you too closely, it is advisable to flash your brake light before you begin to decelerate. The tailgater may be concentrating on you and may not be aware of hazards farther down the road that you are slowing to avoid.

When you are being passed from behind, stay in the center portion of your lane. This will discourage the other driver from re-entering your lane before it is safe.

Jackets and pants made of leather offer the greatest degree of protection to those riding motorcycles.

Use both brakes if you must make a quick stop on a slippery surface. The front brake is safe to use on a slippery surface if applied gradually to prevent locking.

Always simultaneously use both brakes to stop. The brakes are most effective when used at the same time.

To reduce the risk of fatigue on a long trip, dress to protect yourself from tiring elements, such as wind, cold, and rain. Limit yourself to no more than six hours of riding per day and take rest brakes at least every two hours. Avoid using artificial stimulants, as these only result in extreme fatigue when they wear off.

You should use both brakes every time you slow down or stop. Always apply the brakes simultaneously.

When turning, look through the turn to where you want to go by turning only your head. Keep your knees against the gas tank to help maintain your balance while turning. Your arms should be slightly bent any time you are holding the handgrips.

Give plenty of room to vehicles merging onto a highway from an entrance ramp. Merge into a lane farther away from the entrance ramp, if necessary. If it is not possible to change lanes, adjust your speed to allow room for the vehicle to safely enter the highway.

Because of the presence of oil deposits, the center strip of a lane can be hazardous when wet. When rain starts to fall, it is best to ride in the tire tracks left by cars. It is advisable to reduce your speed on wet surfaces.

When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.

All motorcycles are slightly different, so you should check the controls and make sure you know the gear pattern before riding an unfamiliar motorcycle. Work the throttle, clutch, and brakes a few times prior to riding.

You should use a tire gauge to check the tire pressure before every ride. An under-inflated tire may still look okay, so a visual check is not enough.

Before entering a turn, a motorcyclist should reduce their speed by closing the throttle and, if necessary, applying both brakes.

A plastic, shatter-resistant face shield helps protect your entire face, including your eyes. Goggles can protect your eyes, but not the rest of your face. A windshield is not an adequate substitute for either.

If one of your tires goes flat, hold both handle grips firmly, ease off of the throttle, and maintain a straight course. If you must brake, gradually apply the brake of the tire that is not flat (if you are certain of which tire that is). As you slow down, edge to the side of the road, squeeze the clutch, and stop.