Arizona MOTORCYCLE DMV Practice Test 13

You can reduce your risk of injury when riding a motorcycle by wearing an approved helmet, face or eye protection, and protective clothing.

The only way to remove the alcoholic content of a drink from your body is to allow your body time to eliminate it. There are no shortcuts to sobering up.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

Avoid riding directly alongside another vehicle, since this may place you in the vehicle's blind spot. If the driver can't see you, they may enter your lane without warning. Riding alongside a vehicle is also dangerous because the vehicle will block your route of escape if a hazard arises.

Passengers should sit directly behind the operator and lean as the operator leans. They should sit as far forward as they can without crowding the operator, holding onto the operator's waist, hips, or belt.

All passes must be completed within the posted speed limits and only in areas where passing is permitted.

Under normal conditions, you should allow at least two seconds of distance between you and the vehicle ahead of you. Increase your following distance any time conditions are less than ideal.

To maximize your ability to be seen at an intersection, ride with your headlight on and select a lane position that provides oncoming traffic with the best view of your motorcycle. Maintain a space cushion that allows you enough space to take evasive action if a hazard arises. You should never assume that making eye contact with a driver will be enough to make them consciously register your presence.

Blind spots, by definition, are areas that you cannot see by just looking in your mirrors. Turn your head to the side and check over your shoulder for vehicles in your blind spot before you change lanes.

Always look through a turn to where you want to go. Turn only your head to look, not your shoulders, and keep your eyes level with the horizon.

If you cannot avoid riding over an obstacle or uneven surface, you should approach it at as close to a 90-degree angle as possible. Slow down as much as you can, make sure that your motorcycle is upright, and rise slightly off your seat so your knees can absorb some of the force of impact. Just before contact, roll on the throttle slightly to lighten the front end.

To execute a swerve, press the handgrip on the side of your desired turn. Press on the opposite handgrip to return to your original direction after you are clear of the hazard.

Most drivers do not look at their side mirrors as often as they look at their rearview mirror. Therefore, when following a car, it is generally best to ride in the center portion of the lane where you are most likely to be visible in the driver's rearview mirror.

While some people believe that a helmet will limit their vision, this is not the case. Any U.S. Department of Transportation-approved helmet will allow the wearer to see as far as is needed for safe riding.

If you are being chased by a dog, downshift and approach it slowly. Then, as you approach the dog, accelerate and leave it behind. If you encounter a larger animal, brake and prepare to stop.

A staggered formation is the best way to keep ranks close while still maintaining an adequate space cushion for all riders. Ride in a single-file line when riding in curves, turning, or entering or leaving a highway. Never ride side-by-side with another rider.

A sudden change in handling may indicate that a tire on your motorcycle has failed. If you feel a change in the way your motorcycle handles, pull over safely and check your tires.

When slowing or stopping on a surface with reduced traction, you should use caution and apply the brakes more gently than usual.

Riders in a group should overtake another vehicle one at a time. Each rider should complete their pass and resume their position in the group formation before the next rider begins to pass.

Passing must be completed within the posted speed limits, and only in areas where passing is safe and legal.

A number of surfaces can provide poor traction for tires. Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; painted lane markings; oily areas; and metal covers and plates in the road can be more hazardous for a motorcyclist than dry pavement.

For your safety, it is important to be aware of what's behind you. Frequent mirror checks should be a part of your normal searching routine.

Goggles and face shields will help protect your eyes from wind. Most windshields, as well as eyeglasses or sunglasses, will not.

When riding, it is safest for a motorcyclist to wear a helmet, eye protection, a jacket, long pants, sturdy boots, and gloves.

When riding over a rough surface, hold onto the handgrips firmly to ensure that you will maintain directional control over your motorcycle.

If you over-apply your brakes, you may lose traction on one or both wheels and crash.

The last rider in a group of motorcyclists should set the pace of travel. Having the last rider set the pace will ensure that no riders are left behind.

The surest way to avoid the risks of riding under the influence of alcohol is to not ride after you have been drinking. Any amount of alcohol can impair your abilities.

If you can’t avoid a dangerously slippery surface, you should keep your motorcycle upright and proceed over the surface as slowly as possible.

You should wear appropriate protective clothing when riding. Protective garments include sturdy pants and jackets that entirely cover your arms and legs, boots or heavy shoes that cover and support your ankles, and sturdy gloves.