Arizona CAR DMV Practice Test 6

When parking facing downhill on a road with or without a curb, or when facing uphill on a road without a curb, turn your front wheels toward the edge of the road so your vehicle will roll away from traffic if the brakes fail. However, when parking uphill on a road with a curb, turn your wheels toward the center of the road so the vehicle will roll into the curb if the brakes fail.

Driving defensively means anticipating potential errors made by others and preparing to compensate for their mistakes.

If your vehicle has a two-part seat belt system, be sure to wear both the lap belt and the shoulder belt. Wearing either part alone greatly reduces your protection. If you have an automatic shoulder belt, be sure to buckle your lap belt as well.

When driving, do not develop a fixed stare. Frequently check your rearview mirrors so you know the positions of vehicles near you.

You should adjust your speed to travel smoothly with the other traffic on a roadway (provided that the other traffic is driving within the posted speed limits). Remember that vehicles moving in the same direction at the same speed cannot hit each other. Crashes involving multiple vehicles often happen when some vehicles are traveling at different speeds than others.

You should always change lanes gradually and carefully. Only change lanes when necessary. Every lane change increases the possibility of a traffic accident.

Alcohol slows your reflexes and reaction time, reduces your ability to see clearly, and makes you less alert. As the amount of alcohol in your body increases, your judgment worsens and your driving skills decrease. You will have trouble judging distances, speeds, and the movement of other vehicles.

When driving, watch for warning signs of fatigue. You are too tired to drive safely if you are struggling to keep your eyes open, drifting from your lane, or turning up the radio and rolling down your windows to keep yourself awake. If you notice these signs, it is a good idea to find a safe place to park so you can refresh yourself with a short nap.

Downward-facing triangular signs mean drivers must yield. When approaching a yield sign, slow down to a speed that is reasonable for existing conditions and stop if necessary. If you must stop, do so at a marked stop line, if it exists.

Even if your vehicle is properly equipped with mirrors, there are blind spots that cannot be seen by using the mirrors. Before changing lanes, look over your shoulder to check these areas.

Warning signs are usually yellow with black markings. This sign warns drivers that they are arriving upon a fork in the road and they must bear either right or left.

This sign indicates that you may not make a U-turn. You cannot turn around to go in the opposite direction at an intersection where this sign is posted.

This sign indicates that there is a yield sign ahead. You should begin to slow down when you see this warning sign.

A red arrow means "stop." You must remain stopped until a green light or green arrow appears. Do not turn against a red arrow.

Warning signs provide notice to road users of a situation that might not be readily apparent and are usually yellow with black markings. This sign tells drivers to be alert to crossing pedestrians.

Unless there are signs prohibiting it, you may make a right turn on a red light after coming to a complete stop and waiting for other vehicles and pedestrians to clear the intersection.

A round yellow sign indicates that there is a railroad crossing ahead.

You may encounter unexpected conditions in a construction zone. For the safety of yourself, other drivers, and construction workers, drive with extraordinary caution.

When following a motorcyclist, allow for at least a three- to four-second following distance. Motorcycles can stop quickly and following them too closely endangers your life and that of the motorcyclist. If the motorcyclist should fall, you need extra distance to avoid the rider. The chances of a fall are greatest on wet and icy roads, gravel roads, and metal surfaces such as bridges, gratings, and streetcar or railroad tracks.

Do not go around or under any lowered gate at a railroad crossing. Once the gate is raised, do not proceed across the tracks until you can see clearly in both directions and are sure there are no trains coming.

When approaching a T intersection while traveling on the street ending at the intersection, you must stop and yield the right-of-way to cross traffic. Only proceed when it is safe to do so.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns drivers that the number of lanes is reduced ahead and that traffic should merge left.

You may not stop, stand, or park at a red-painted curb.

This sign indicates that there is a crossroad ahead.

Treat a flashing red traffic signal the same as you would treat a stop sign. Come to a complete stop, yield to oncoming traffic or pedestrians, and proceed when the way is clear.

When approaching this sign, you must yield the right-of-way. Slow down and let vehicles and pedestrians crossing your path pass before you proceed. If necessary, stop before going ahead.

Warning signs alert drivers to upcoming hazards and are usually yellow with black markings. This sign warns drivers about potential traffic merging into their lane from the right.

If a traffic signal is displaying a steady red arrow, traffic in the indicated lane may not proceed in the direction shown by the arrow. Drivers must come to a full stop and wait for a green signal to proceed.

Whenever you want to change lanes or enter traffic, you must be sure that there are no vehicles in your way in the lane you want to enter. Always check for traffic to the side of and behind your vehicle before you change lanes.

Warning signs are usually yellow with black markings. This sign indicates the presence of a crosswalk, regardless of if it is marked on the pavement or not. Upon seeing this sign, you should be alert and allow any pedestrians to cross the road safely.